Printable Version of Topic
914World.com _ 914World Garage _ Modify your front valance and bumper for GT cooler
Posted by: Mark Henry May 14 2021, 10:57 AM
Hi I'd like to see how you dood it!
I just started hacking on my valance and I'm looking for inspiration.
Attached image(s)
Posted by: VegasRacer May 14 2021, 11:21 AM
Posted by: mepstein May 14 2021, 11:47 AM
A member here Lazer cut the flat front piece then welded it to the valance. Looked great.
Max Moritz GT
Attached image(s)
Posted by: Marv's3.6six May 14 2021, 12:04 PM
Here is mine. Front bumper one off fiberglass, lower valence steel.
Attached thumbnail(s)
Posted by: wes May 14 2021, 12:14 PM
QUOTE(mepstein @ May 14 2021, 10:47 AM)
A member here Lazer cut the flat front piece then welded it to the valance. Looked great.
Max Moritz GT
Looks perfect! I need one presently using a plastic one.
Posted by: mepstein May 14 2021, 12:47 PM
@http://www.914world.com/bbs2/index.php?showuser=9892 Ben might already have something in the works.
Posted by: Justinp71 May 14 2021, 01:27 PM
I just bought a front valance similar to yours but in fiberglass. For the race track in hotter weather out here I cut out all the holes to one big opening and adding stainless square mesh / rat wire. The expanded metal is all flattened which I felt would not allow for very laminar flow. I need all the help I can get with cooling .
Posted by: Mark Henry May 14 2021, 01:47 PM
QUOTE(mepstein @ May 14 2021, 01:47 PM)
A member here Lazer cut the flat front piece then welded it to the valance. Looked great.
Max Moritz GT
Perfect
That's what I want.
I'm going to fake it till I really run a cooler, right now I just don't drive it on real hot days. I can get away with it in the great white north.
Posted by: Mark Henry May 14 2021, 02:01 PM
QUOTE(Justinp71 @ May 14 2021, 03:27 PM)
... one big opening and adding stainless square mesh / rat wire. The expanded metal is all flattened which I felt would not allow for very laminar flow. I need all the help I can get with cooling
.
Thanks,
I have the flat mesh and and I don't care for it...why am I blocking it back off?
The SS rat wire I see on amazon is a fairly light wire? .07mm x 4.5mm square?
Posted by: roblav1 May 14 2021, 02:03 PM
Here's how I do the inside. Did it similar with a 3.6 build.
Attached thumbnail(s)
Posted by: wes May 14 2021, 03:19 PM
I used the Material from an old damaged 914 engine lid.
Posted by: mb911 May 15 2021, 06:19 AM
I did mine out of steel and yes it looks great. If I were to do it again I would just do fiberglass. It's waaaaaay to much work.
Posted by: Shivers May 15 2021, 08:35 AM
QUOTE(Mark Henry @ May 14 2021, 09:57 AM)
Hi I'd like to see how you dood it!
I just started hacking on my valance and I'm looking for inspiration.
I cut the hole 1/2" smaller than what I was shooting for.
I used hammers a slap and dollies to roll the metal over, trying to get a pressed factory look.
Then welded a plenum on for the finish. Gave it the break to follow the factory stiffening breaks.
Need to make it pretty now. Steel is real!
Posted by: mepstein May 15 2021, 09:25 AM
I can’t seem to find the recent thread from the member who cut out a metal gt template for the valance.
Posted by: mate914 May 15 2021, 09:37 AM
QUOTE(Shivers @ May 15 2021, 10:35 AM)
QUOTE(Mark Henry @ May 14 2021, 09:57 AM)
Hi I'd like to see how you dood it!
I just started hacking on my valance and I'm looking for inspiration.
I cut the hole 1/2" smaller than what I was shooting for.
I used hammers a slap and dollies to roll the metal over, trying to get a pressed factory look.
Then welded a plenum on for the finish. Gave it the break to follow the factory stiffening breaks.
Need to make it pretty now. Steel is real!
I like that one. Simple and cost effective. I am doing this also and love the ideas.
Matt
Posted by: Shivers May 15 2021, 09:39 AM
QUOTE(mepstein @ May 15 2021, 08:25 AM)
I can’t seem to find the recent thread from the member who cut out a metal gt template for the valance.
Was this to add the chin to the valance?
Posted by: mepstein May 15 2021, 09:40 AM
QUOTE(Shivers @ May 15 2021, 11:39 AM)
QUOTE(mepstein @ May 15 2021, 08:25 AM)
I can’t seem to find the recent thread from the member who cut out a metal gt template for the valance.
Was this to add the chin to the valance?
yes
Posted by: rgalla9146 May 15 2021, 09:52 AM
QUOTE(mepstein @ May 15 2021, 11:40 AM)
QUOTE(Shivers @ May 15 2021, 11:39 AM)
QUOTE(mepstein @ May 15 2021, 08:25 AM)
I can’t seem to find the recent thread from the member who cut out a metal gt template for the valance.
Was this to add the chin to the valance?
yes
Is it the silver 3.6 done by Patrick Motorsport ?
Posted by: mepstein May 15 2021, 10:28 AM
QUOTE(rgalla9146 @ May 15 2021, 11:52 AM)
QUOTE(mepstein @ May 15 2021, 11:40 AM)
QUOTE(Shivers @ May 15 2021, 11:39 AM)
QUOTE(mepstein @ May 15 2021, 08:25 AM)
I can’t seem to find the recent thread from the member who cut out a metal gt template for the valance.
Was this to add the chin to the valance?
yes
Is it the silver 3.6 done by Patrick Motorsport ?
No, not a big dollar build. Just one of our members doing their thing. Maybe 6 months ago.
Posted by: Shivers May 15 2021, 10:36 AM
QUOTE(mepstein @ May 15 2021, 08:40 AM)
QUOTE(Shivers @ May 15 2021, 11:39 AM)
QUOTE(mepstein @ May 15 2021, 08:25 AM)
I can’t seem to find the recent thread from the member who cut out a metal gt template for the valance.
Was this to add the chin to the valance?
yes
I've got some time, I'll have a look. I did mock up with cardboard the chin. Since it is a road car for spirited driving, a bit of an outlaw, I ended up going without the chin. Kind of a GT for the street. It actually has a very nice line, but not a GT copy.
Posted by: Shivers May 15 2021, 11:06 AM
QUOTE(mepstein @ May 15 2021, 08:40 AM)
QUOTE(Shivers @ May 15 2021, 11:39 AM)
QUOTE(mepstein @ May 15 2021, 08:25 AM)
I can’t seem to find the recent thread from the member who cut out a metal gt template for the valance.
Was this to add the chin to the valance?
yes
mb911 was mocking up a steel GT front valance in 2020. Maybe he kept a template.
http://www.914world.com/bbs2/index.php?showtopic=349523&hl=GT+valance
Posted by: mb911 May 15 2021, 02:07 PM
QUOTE(Shivers @ May 15 2021, 09:06 AM)
QUOTE(mepstein @ May 15 2021, 08:40 AM)
QUOTE(Shivers @ May 15 2021, 11:39 AM)
QUOTE(mepstein @ May 15 2021, 08:25 AM)
I can’t seem to find the recent thread from the member who cut out a metal gt template for the valance.
Was this to add the chin to the valance?
yes
mb911 was mocking up a steel GT front valance in 2020. Maybe he kept a template.
http://www.914world.com/bbs2/index.php?showtopic=349523&hl=GT+valance
Here is how mine turned out
Posted by: Shivers May 15 2021, 02:29 PM
That came out real nice
Posted by: Mark Henry May 15 2021, 04:56 PM
I'm not overly fond of the GT valance I mean it looks great for the period look, but I'm going for a finer look.
Posted by: Shivers May 15 2021, 05:07 PM
QUOTE(Mark Henry @ May 15 2021, 03:56 PM)
I'm not overly fond of the GT valance I mean it looks great for the period look, but I'm going for a finer look.
That is what I did. Just a clean line with the same size opening
Posted by: live free & drive May 15 2021, 06:01 PM
Below is a pic that you can read the contours of the inlet somewhat - the louvered inlet is nice as it picks up the fog light cover details
Posted by: rgalla9146 May 16 2021, 05:44 AM
QUOTE(live free & drive @ May 15 2021, 08:01 PM)
Below is a pic that you can read the contours of the inlet somewhat - the louvered inlet is nice as it picks up the fog light cover details
Is that a later 911 plastic engine grill ? great idea !
Posted by: Mark Henry May 16 2021, 06:40 AM
My valance so far....more of a pouting lip.
I think I almost have enough structure to take it back off.
Attached image(s)
Posted by: Mark Henry May 16 2021, 06:47 AM
Another angle.
Attached image(s)
Posted by: Shivers May 16 2021, 07:01 AM
That actually looks pretty good.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)