I recently bought a 70 914 to use for parts on another project. Now that it has been delivered I am reluctant to part it. I think it would make a great platform for a GT clone.
I am not ready to take on 2 projects, so I want to ask the collective: should I offer it up for sale “as is” or is it really just a parts candidate. My needs for the existing project would mean I cut sheet metal from this car.
[attachmentid=793329]
The car obviously had body damage to the left side and the PO cut out all the fenders to facilitate flared fender.
The obligatory “hell hole” pic
The structure of the car is good. The dash is very good. The engine was allegedly overhauled and punched to 2.0 liters, starts and runs well. Shift linkage bushings are literally gone so it is difficult to drive. The brakes are very good.
I guess I’m fishing for a buyer. What I really need to know is would this car bring 3 or even 4 thousand dollars as is or should I make the effort to part it out ( after I get the stuff I need!)
Looks like a keeper to me
Get what you need and sell the rest. No need to get bogged down with what IF. Get yours done YOUR way.
It looks like a good rebuildable project for someone, if not for you. It looks like the damage it sustained is similar to what my '71 has.
Without measurements to see if there's any other structural damage, it's not cast in stone, but it appears that a replacement left rear quarter panel to keep it a narrow body, and a little repair to the hell hole would make a good starting point ... or the start of a GT clone
Let me know what your looking for $, Thanks
Save it. It sounds like a decent starting point and less rusty than some of the cars being fixed. Depending on what parts you need off of it, you could sell it as a roller or shell, use the money to buy the sections you need. Maybe the person who buys it has a car that is worse off than yours and you can cut the sections you need off of their car.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)