Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Sagging Rear End

Posted by: Lfrate02@hotmail.com Jun 4 2021, 09:42 AM

Hello! I have a 72 1.7 and the back end is sagging and now bottoming out over bumps. I know it’s time to redo things and am looking for recommendations for parts as well as a shop in Mid-coast Maine. I was thinking springs and shocks. I only drive on the roads and want both comfort and performance. Race/AX spec not necessary. Thx.

Posted by: mepstein Jun 4 2021, 10:14 AM

New shocks and springs will fix this. Don't toss the old shocks since you need to move over a couple parts to the new assembly. Your local Garage can easily do this fix or you can do it yourself. No special tools are required.

Posted by: windforfun Jun 4 2021, 10:48 AM

100 lb Weltmeister springs. BTDT.

Posted by: Lfrate02@hotmail.com Jun 4 2021, 11:31 AM

QUOTE(mepstein @ Jun 4 2021, 12:14 PM) *

New shocks and springs will fix this. Don't toss the old shocks since you need to move over a couple parts to the new assembly. Your local Garage can easily do this fix or you can do it yourself. No special tools are required.


How about this kit?

http://www.autoatlanta.com/Porsche-Rear-Coil-Over-Kit-springs-Sleeves-Hats-&-Collars-with-S-Parts-PN-RRSRRCOK914.html

Posted by: mepstein Jun 4 2021, 11:44 AM

QUOTE(Lfrate02@hotmail.com @ Jun 4 2021, 01:31 PM) *

QUOTE(mepstein @ Jun 4 2021, 12:14 PM) *

New shocks and springs will fix this. Don't toss the old shocks since you need to move over a couple parts to the new assembly. Your local Garage can easily do this fix or you can do it yourself. No special tools are required.


How about this kit?

http://www.autoatlanta.com/Porsche-Rear-Coil-Over-Kit-springs-Sleeves-Hats-&-Collars-with-S-Parts-PN-RRSRRCOK914.html

Doesn’t include shocks. The springs may be more than you want for a street car. Adjustability is nice but a stock set up will work fine for a street car. It just depends what you want out of your car.
If you want a nice riding street car, find Boge shocks, front and rear and 100lb springs. A little more performance oriented and slightly firmer, use Bilstein heavy duty shocks (not sport, they are even stiffer).

I’m assuming if you rear shock and springs have failed, your front strut inserts also need replacement. It’s also an easy diy job if you choose.

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)