Printable Version of Topic
Click here to view this topic in its original format
914World.com _ 914World Garage _ Headlight switch removal
Posted by: partwerks Jun 12 2021, 07:45 PM
To remove the pull part on the headlight switch, after turning the coin shaped piece loose from the dash face, is there some sort of set screw to remove it?
Posted by: bkrantz Jun 12 2021, 07:58 PM
QUOTE(partwerks @ Jun 12 2021, 07:45 PM) 
To remove the pull part on the headlight switch, after turning the coin shaped piece loose from the dash face, is there some sort of set screw to remove it?
No.
After unscrewing the knob, and the shaft retaining nut (shiny round thing with the notches), the switch should pull out from behind the dash. The wire harness may be stiff.
Posted by: partwerks Jun 12 2021, 08:10 PM
QUOTE(bkrantz @ Jun 12 2021, 05:58 PM)
QUOTE(partwerks @ Jun 12 2021, 07:45 PM)
To remove the pull part on the headlight switch, after turning the coin shaped piece loose from the dash face, is there some sort of set screw to remove it?
No.
After unscrewing the knob, and the shaft retaining nut (shiny round thing with the notches), the switch should pull out from behind the dash. The wire harness may be stiff.
So at this point, I just need to unscrew it, it sounds like?
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)