Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Accelerator cable connector

Posted by: jim_hoyland Jun 23 2021, 01:11 PM

Need to find a seller for that piece that connects the accelerator cable to the pedal cluster.

Posted by: mepstein Jun 23 2021, 01:30 PM

If you show me a pic of the part and I have it, I will send it to you.

Posted by: jim_hoyland Jun 23 2021, 06:07 PM

QUOTE(mepstein @ Jun 23 2021, 12:30 PM)

If you show me a pic of the part and I have it, I will send with the studs.

Thanks, cars not here; IIRC the accelerator cable attaches to the pedal cluster with a ball-cup fitting that thread onto the cable end.

Attached image(s)

Posted by: SO.O.C914er Jun 23 2021, 08:57 PM

Hi Jim, I believe pelican parts has this part.

Posted by: Montreal914 Jun 23 2021, 09:09 PM

Isn't there a pin that goes in there to ensure the socket stays on the ball?

Posted by: Don914 Jun 23 2021, 09:20 PM

QUOTE(jim_hoyland @ Jun 23 2021, 02:11 PM)

Need to find a seller for that piece that connects the accelerator cable to the pedal cluster.

Jim, this is not related to your question but I just replaced my accelerator cable and getting the ball cup back on the ball was a bit awkward. I used hose clamp pliers and it was easy. Doesn't answer your question but might help, don't know how to place image in my reply, sorry. If Pelican does not have it, try Zims Automotive in Bedford TX

Posted by: jim_hoyland Jun 23 2021, 09:36 PM

It’s been a long time since I had to clamp the cup back on; but, you are right it’s a tricky maneuver….

Posted by: bdstone914 Jun 23 2021, 10:29 PM

QUOTE(Montreal914 @ Jun 23 2021, 08:09 PM)

Isn't there a pin that goes in there to ensure the socket stays on the ball?

Not on 914's. There is an internal clip
The ones on G50 pedal sets do have a pin that holds them on in addition to the ring clip. They can be used on a 914 but would be difficult to install.

@http://www.914world.com/bbs2/index.php?showuser=12023