Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ New on evilbay - 914-6 2.0

Posted by: KaptKaos Jul 22 2003, 11:31 AM

for this, but I figured I'd post it.

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=33615&item=2424899078

Have fun.

Posted by: Lawrence914-6 Jul 22 2003, 11:49 AM

That's worth 500 bucks to me.

Posted by: rhodyguy Jul 22 2003, 12:13 PM

this one should be interesting in 6 days, 21 hours and 59 minutes. you guys are going to drive the bid up fighting for this one.

kevin

Posted by: Gint Jul 22 2003, 12:13 PM

But how much MORE than $500 is it worth to you?

Posted by: Brad Roberts Jul 22 2003, 12:16 PM

I'll delete this thread.


B

Posted by: Lawrence914-6 Jul 22 2003, 12:21 PM

How much more? Not enough to make shipping worth it.

The carbs, if good, are worth 700.00.

The rest of the motor is a total crap shoot. Might be worth a hundred bucks to me, so I could rip it apart and play. smile.gif

-Rusty smoke.gif

Posted by: ! Jul 22 2003, 12:22 PM

Carbs manifolds and cleaners are worth 1200.....

Posted by: ArtechnikA Jul 22 2003, 12:48 PM

QUOTE(Gint @ Jul 22 2003, 10:13 AM)
But how much MORE than $500 is it worth to you?

and is that amount over or under the reserve ?
BTW - i have a question to the seller asking the enging number...

Posted by: Gint Jul 22 2003, 12:54 PM

Oh, I'm done. I don't need a road trip to San Antonio. I was just teasin Rusty.

QUOTE
I'll delete this thread.


B


Why would you do that?

Posted by: Lawrence914-6 Jul 22 2003, 12:55 PM

Hey Gint... Someday my motor WILL quit leaking.

Of course, it'll be out of oil... finger.gif

-Rusty smoke.gif

Posted by: FlatSix Jul 23 2003, 06:43 AM

From the photos it looks like there are a couple of heat exchangers too

Posted by: ArtechnikA Jul 23 2003, 06:55 AM

QUOTE(FlatSix @ Jul 23 2003, 04:43 AM)
From the photos it looks like there are a couple of heat exchangers too

hard to say - there's a lot of stuff in that picture.
i agree there's HE's there, but it's hard to say if they're actually for that engine, and attached, at least to my eyes. the purported /6 transmission is not attached, although there's a few lined up on the wall behind. you just hafta kinda hope whoever's crating the stuff can identify a /6 transmission by sight ...

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)