Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Help with a wheel identification

Posted by: emerygt350 Jul 20 2021, 05:21 PM

Hello,

I was hoping someone on here might be able to identify these wheels. There are no marks on them that I can find.

Rears are dished more than the front, different offset front and rear. 16inch wheels.
IPB Image

Sorry for the not so perfect photo, if needed I can get it out of the garage for some close ups tomorrow.

Posted by: rgalla9146 Jul 20 2021, 05:53 PM


Which car ?

Posted by: emerygt350 Jul 20 2021, 06:25 PM

QUOTE(rgalla9146 @ Jul 20 2021, 05:53 PM) *

Which car ?


The 914.

Posted by: Front yard mechanic Jul 20 2021, 06:27 PM

QUOTE(rgalla9146 @ Jul 20 2021, 03:53 PM) *

Which car ?

The ford truck dugh

Posted by: Blue6 Jul 20 2021, 07:00 PM

QUOTE(emerygt350 @ Jul 20 2021, 05:25 PM) *

QUOTE(rgalla9146 @ Jul 20 2021, 05:53 PM) *

Which car ?


The 914.


welcome.png Those are Fuchs. Appear to be 7x16 front, 8x16 rears. Not stock on a 914, but came on lots of 911’s..

Posted by: emerygt350 Jul 20 2021, 07:10 PM

QUOTE(Blue6 @ Jul 20 2021, 07:00 PM) *

QUOTE(emerygt350 @ Jul 20 2021, 05:25 PM) *

QUOTE(rgalla9146 @ Jul 20 2021, 05:53 PM) *

Which car ?


The 914.


welcome.png Those are Fuchs. Appear to be 7x16 front, 8x16 rears. Not stock on a 914, but came on lots of 911’s..

Thank you, I have been lurking for a little while as I have been fixing all the little previous owner surprises in the engine bay.

I thought Fuchs would have some kind of foundry? marks on them. Do you know what years they would have been used on the 911?

Posted by: roblav1 Jul 20 2021, 07:45 PM

If real Fuchs, there's little "fox" markings on the inside. Those look like 16" wheels, definitely not 15".

Posted by: VegasRacer Jul 20 2021, 09:55 PM

QUOTE(emerygt350 @ Jul 20 2021, 06:10 PM) *

I thought Fuchs would have some kind of foundry? marks on them. Do you know what years they would have been used on the 911?

Real Fuchs will have this Fox logo Attached Image on the backside of one of the spokes.
A part number, the size and backspacing may also be included.

They were available from 1967 to 1989.

Posted by: 73-914 Jul 20 2021, 10:54 PM

welcome.png

Posted by: infraredcalvin Jul 21 2021, 12:00 AM

Those look to be real, backside markings will look like this. The fox logo is below the “7” of the part number, it should be in the vicinity of the part number or somewhere on the hub. It’ll also have a triangle with two letters inside as you can see by the wheel size stamping.

Attached Image

Posted by: emerygt350 Jul 21 2021, 04:30 AM

[
Interesting, I will pull a couple and see if I can find that. I don't remember seeing any markings but I was looking for something larger.

Posted by: NARP74 Jul 21 2021, 10:04 AM

You might have to clean decades of brake dust... I'd like more pictures of that car too.

Posted by: emerygt350 Jul 21 2021, 01:04 PM

QUOTE(NARP74 @ Jul 21 2021, 10:04 AM) *

You might have to clean decades of brake dust... I'd like more pictures of that car too.


It's a 1973 chalon. 914s. I will get some up soon.

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)