Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Green wire purpose

Posted by: dt4 Jul 31 2021, 10:02 AM

Hi
I have a green wire coming off the wiring loom under the battery tray
Could some one let me know what this is for please Attached Image

Posted by: JeffBowlsby Jul 31 2021, 10:17 AM

Its actually a green/black stripe wire. It is the connection point on th main harness for an optional oil temp sensor at the bottom of the engine case, which feeds a signal to the optional oil temp gauge in the center console of 1973-76 cars.

Posted by: dt4 Jul 31 2021, 10:45 AM

QUOTE(JeffBowlsby @ Jul 31 2021, 05:17 PM) *

Its actually a green/black stripe wire. It is the connection point on th main harness for an optional oil temp sensor at the bottom of the engine case, which feeds a signal to the optional oil temp gauge in the center console of 1973-76 cars.

marvellous, thanks Jeff, I have the loose end of a wire coming off the oil temperature sensor and the gauge in the centre console
I'll connect the 2 and see how it goes


Posted by: 914Sixer Jul 31 2021, 10:58 AM

Probably disconnected because the wire from the sender to the plug is bad causing bad oil temp reading. Jeff sells replacement wire that is encased to prevent problem.

Posted by: 930cabman Aug 17 2021, 07:03 AM

QUOTE(dt4 @ Jul 31 2021, 10:45 AM) *

QUOTE(JeffBowlsby @ Jul 31 2021, 05:17 PM) *

Its actually a green/black stripe wire. It is the connection point on th main harness for an optional oil temp sensor at the bottom of the engine case, which feeds a signal to the optional oil temp gauge in the center console of 1973-76 cars.

marvellous, thanks Jeff, I have the loose end of a wire coming off the oil temperature sensor and the gauge in the centre console
I'll connect the 2 and see how it goes


Did connecting the dots get your oil temp gauge working?

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)