Printable Version of Topic
Click here to view this topic in its original format
914World.com _ 914World Garage _ Bolts, nuts and washers oh my
Posted by: Shivers Aug 29 2021, 07:18 PM
I can't seem to find out exactly what I need for fasteners. Looked around on the internet and was able to ID my hubs, but can't find what sizes, grade, washers (?). Also looking for a fair deal on this hardware. Hoping the collective wisdom can help me out, this is a whole new ball of wax. 20 mm rotors, hubs 47 mm Thanks
Posted by: bdstone914 Aug 29 2021, 08:34 PM
I can't seem to find out exactly what I need for fasteners. Looked around on the internet and was able to ID my hubs, but can't find what sizes, grade, washers (?). Also looking for a fair deal on this hardware. Hoping the collective wisdom can help me out, this is a whole new ball of wax. 20 mm rotors, hubs 47 mm Thanks
8mm x 1.25 x 24mm hex head bolts, Grade 8.8 minimum, 8mm wave washers and hex nuts. The nuts and washers go against the side of the hub you show.
Posted by: Shivers Aug 29 2021, 09:18 PM
Thank you very much.
@http://www.914world.com/bbs2/index.php?showuser=1319
Posted by: siverson Aug 29 2021, 10:13 PM
https://www.mcmaster.com/
Yellow zinc or yellow cadmium and start building a mini metric based Home Depot hardware aisle in your garage. 
-Steve
Posted by: Shivers Aug 29 2021, 11:45 PM
Thank you! @http://www.914world.com/bbs2/index.php?showuser=654
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)