Printable Version of Topic
Click here to view this topic in its original format
914World.com _ 914World Garage _ Fall G & R Air Cooled Swap Meet , Sunday Oct. 3 6AM-12PM, 10000 Indiana Ave Unit 9, Riverside CA
Posted by: bdstone914 Sep 4 2021, 05:27 PM
The G & R 914 Swap meet will again be held on Oct 3.
For those of you that have not attended before, this swap meet has been held for over 15 years. It as originally hosted by the late Ron Meier ( screename Slits ) and held in downtown Riverside at Core Recyclers where he worked.
This has been traditionally a 914 Porsche swap meet. I would like to expand the meet to include sellers of any air cooled Porsche. you can bring what ever parts you want to sell. Many owners have other makes of cars too.
Children and pets welcome. Dogs need to be leashed.
Free to buyers, $20 fee to sellers.
I will be there by 6AM. Bottled water will be offered by no morning snacks as before due to Covid precautions.
Address is 10000 Indiana Ave Unit 9. Just off the 91 freeway between Tyler and Van Buren.
If you have a minimal clearance car do not use the entrance across from Roger Dunn Golf shop. I pulling a trailer it is easier to exit Van Buren.
Please pass the word to those who do not frequent the forum.
Feel free to post a link on 914 social media sites.
Bring all your unwanted/unneeded wants needing a new home.
Post any specific parts needs to alert sellers.
PM me if you need my cell number.
Bruce
Posted by: Coondog Sep 4 2021, 07:13 PM
Awesome, thank u
Posted by: Montreal914 Sep 4 2021, 07:18 PM
Thank you for organizing Bruce! 
See you there.
Posted by: 76-914 Sep 4 2021, 07:30 PM
Posted by: ValcoOscar Sep 4 2021, 08:48 PM
Posted by: Nacho Sep 5 2021, 09:58 AM
Posted by: SO.O.C914er Sep 5 2021, 10:36 AM
Thank you Bruce look forward to it. 
Posted by: Shivers Sep 5 2021, 11:17 AM
It has been a while for me, it was a lot of fun. Ron, Howard, Melba and Lou had me laughing most of the time. I'll try
Posted by: Beach914 Sep 5 2021, 12:10 PM
Rats, my granddaughter’s pending birth is going to mess up going to Phoenix Club and this event! Ive been waiting all year too. Glad everyone is getting together.
Have fun everyone. I’ve got other priorities.
Posted by: bdstone914 Sep 5 2021, 02:48 PM
Rats, my granddaughter’s pending birth is going to mess up going to Phoenix Club and this event! Ive been waiting all year too. Glad everyone is getting together.
Have fun everyone. I’ve got other priorities.
Tell her to pop that one out so you can meet your priorities too.
Or bring her along. It could be the first swap meet baby!!!
Posted by: Blue6 Sep 7 2021, 10:22 PM
Thanks Bruce. See ya then.... 
Posted by: Beach914 Sep 8 2021, 07:51 AM
Rats, my granddaughter’s pending birth is going to mess up going to Phoenix Club and this event! Ive been waiting all year too. Glad everyone is getting together.
Have fun everyone. I’ve got other priorities.
Tell her to pop that one out so you can meet your priorities too.
Or bring her along. It could be the first swap meet baby!!!
I would Bruce except that she's having the our grandaughter in Dubai. Due September 24th. We don’t get back until October 6 which means i miss Phoenix Club also.
Posted by: tpines Sep 8 2021, 08:15 AM
Looking forward to it Bruce and thanks again for the the 914 seat I just bought from you a few weeks ago!
Clark
Posted by: bdstone914 Sep 11 2021, 12:33 PM
Bump
Posted by: siverson Sep 11 2021, 01:46 PM
This used to be G & R - ie Glenn and Ron, right?
Sorry if I missed it, but what happened to Glenn? Is he still around? I was recently helping a friend work on one of his old cars that he bought about 20 years ago...
-Steve
Posted by: Steve Sep 11 2021, 04:03 PM
This used to be G & R - ie Glenn and Ron, right?
Sorry if I missed it, but what happened to Glenn? Is he still around? I was recently helping a friend work on one of his old cars that he bought about 20 years ago...
-Steve
Glenn is still around. I still see him at Porsche swap meets. I think he still works for Pelican.
Posted by: bdstone914 Sep 11 2021, 05:43 PM
This used to be G & R - ie Glenn and Ron, right?
Sorry if I missed it, but what happened to Glenn? Is he still around? I was recently helping a friend work on one of his old cars that he bought about 20 years ago...
-Steve
Glenn is still around. I still see him at Porsche swap meets. I think he still works for Pelican.
Yes Glenn is alive and well. He makes guest appearances at the swap meet.
Posted by: JoeSh Sep 25 2021, 07:51 PM
Hi Folks
See you at the swap meet! Here's what I'm looking for:
- pair of side mirrors
- matching window crank handles (or one to match the plastic one I have)
- 10 2mm alignment shims (or 20mm any sizes)
- Speedo cable
- Accelerator cable
- generator
- oil check tube (not the dipstick but what it goes into)
- black dash machine screws? (could just paint some)
Cheers!
Joe
Posted by: bdstone914 Sep 26 2021, 05:52 AM
Hi Folks
See you at the swap meet! Here's what I'm looking for:
- pair of side mirrors
- matching window crank handles (or one to match the plastic one I have)
- 10 2mm alignment shims (or 20mm any sizes)
- Speedo cable
- Accelerator cable
- generator
- oil check tube (not the dipstick but what it goes into)
- black dash machine screws? (could just paint some)
Cheers!
Joe
@http://www.914world.com/bbs2/index.php?showuser=1142
I have shims, window cranks and a rebuilt alternator.
Posted by: djway Sep 29 2021, 08:51 PM
I was digging through my stuff and found a set of domed pistons I pulled off a motor I once tore down.
Can bring if anyone interested.
Posted by: RiqueMar Oct 2 2021, 05:37 PM
Just giving this thread a little
See everyone tomorrow, thanks in advance to @http://www.914world.com/bbs2/index.php?showuser=1319 for hosting!
Posted by: 76-914 Oct 3 2021, 01:04 PM
Thx for putting up with us another year Bruce. Enjoyed speaking with old friends and even found a few last minute items.
Posted by: SO.O.C914er Oct 3 2021, 03:07 PM
Picked up some parts. Hand shakes and fist pumps with old friends.
Posted by: GBX0073 Oct 3 2021, 03:23 PM
Bruce Hope you had little to pack back-up
Sounds like a great event
Posted by: Montreal914 Oct 3 2021, 05:09 PM
Thank you Bruce for organizing.
Nice to chat about 914s in person while picking up a few parts. 
...And nice to see running 914s, good for the spirit!
Posted by: Beach914 Oct 4 2021, 09:53 AM
What no pics ! Would like to see some of the goodies put out there and what I missed!
Posted by: tpines Oct 5 2021, 12:53 PM
Thanks for hosting a fun event Bruce! Hopefully more guys will be able to join the fun in the future!
Clark
Posted by: bdstone914 Oct 5 2021, 09:26 PM
I was digging through my stuff and found a set of domed pistons I pulled off a motor I once tore down.
Can bring if anyone interested.
@http://www.914world.com/bbs2/index.php?showuser=19266
What size?
Posted by: bdstone914 Oct 5 2021, 09:29 PM
What no pics ! Would like to see some of the goodies put out there and what I missed!
@http://www.914world.com/bbs2/index.php?showuser=11519
Here you go
Attached image(s)
Posted by: djway Oct 5 2021, 10:53 PM
I was digging through my stuff and found a set of domed pistons I pulled off a motor I once tore down.
Can bring if anyone interested.
@http://www.914world.com/bbs2/index.php?showuser=19266
What size?
You can check the next time you drop by
Posted by: Shivers Oct 6 2021, 06:55 AM
Really bummed I could not make it. I sat home with my bottle of Augmentin. I hope it went well.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)