Will appreciate advice from the community regarding a person/business that provides the service of restoring/refurbishing stock 2.0L Distributors?
Specifically, for Fuel Injection application setup.
Thanks in advance.
Tom
Great. Thank you Jett.
Redmond is not too far from me here in Snohomish.
Anyone in particular at Redmonad European that I should ask for?
BTW: Did their contact do a great job restoring your 914 Distributor?
Thanks,
Tom
Sparxworks has done 2 for me and I have two in Houston right now. Click to open
Attached thumbnail(s)
Do either of these rebuilders replace weight springs too?
I'll check with "Houston" regarding the Weight Springs and if they check and if they can replace correctly.
What other items/actions do you consider are important with a good, reliable Distributor restoration?
Thanks,
Tom
Since you ask, can the vacuum canister be tested and repaired too?
Tested yes, repaired NO.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)