Printable Version of Topic

Posted by: partwerks Sep 20 2021, 07:54 PM

Not having any luck finding an article/write up, on taking out, and putting back in the ventilation. Do this. Don't do that stuff.
Fresh air blower, valves, and defroster ducts.

Posted by: 914werke Sep 20 2021, 08:36 PM

http://www.914world.com/bbs2/index.php?s=&showtopic=86942&view=findpost&p=1066336

Posted by: iankarr Sep 20 2021, 09:53 PM

Here's a video that may be helpful


https://www.youtube.com/watch?v=Uhs6pedBOXM

Posted by: partwerks Sep 20 2021, 10:08 PM

Is there a way, or link, that would be easier to send to someone in an email?

Posted by: mgp4591 Sep 20 2021, 10:18 PM

Try this... it's how I reinstalled mine.
http://www.914world.com/bbs2/index.php?showtopic=86942

Posted by: iankarr Sep 21 2021, 06:06 AM

Here ya go. You can also use “share” while in YouTube.

https://youtu.be/Uhs6pedBOXM

Posted by: 914werke Sep 21 2021, 01:10 PM

One item that didnt get covereing in the classic thread is seal renewal.
If you are gonna do this job... replace the foam seals! You DONT wanna have to do it again!

Posted by: DRPHIL914 Sep 22 2021, 08:40 AM

earlier this year i did a thread on the seal renewal
including testing the fan, and resistors, replacing the full
fan blower motor and seal, etc.

i dont have the link but a search should find it.

Posted by: DC_neun_vierzehn Sep 22 2021, 08:42 PM

Another great vid by Ian. Damn. Now I'm ready to take this project on ... I think. Just need to find 2 helpers.