My console temp gauge either bounces all over the place or just stays in the red (even on a cold engine). Has anybody had this specific issue they sorted out previously? Thanks.
loose wire between the main harness and the sending unit underneath the engine
Sending wire is going open. Replace wire from sender to plug under battery with temporary wire. See if problem goes away.
Right down by the drain plug and strainer.
Look on the bottom of engine. You can see where wire is. Wire plug in is under battery tray on engine shelf from main harness.
Thanks guys!
Crazy. We're working on the same thing at the same time. Not sure how I didn't notice this before posting.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)