Does anyone know if the original 4 pin relay (Hella TBB26 4DB 002 479-01) can be found somewhere? I’ve been trying to locate one and if using the same part code, I can only find relays with 3 pins and as far as I can tell, those do not really work correctly.
I bought a 4 pin flasher relay from RockAuto last week made by Uro.
Hella does not make them anymore. Here you go, GERMAN made replacement.
Attached thumbnail(s)
we have always had plenty on the shelf, the relay works the turn signls, the emergency flashers, the handbrake light and the low brake circuit pressure light
Quite important to have the correct relay installed
Just a note: if you have a 1.8, the aftermarket ones more often than not don’t work right. Don’t know why. If you can, stick with NOS units. A member was selling used ones a few months ago.
I installed a Hella one recently and all of a sudden I got a buzzing noise and dim L/R arrows. Disconnected the wire on the brakeswitch and it stopped.
Still chasing the problem. Looking for a new relay that actually works.
Prior to the hella one I tried to install a URO relay. Crap, that one just fell apart during install
Difficult to find a good and correct one.
Funny thing is that the wehrle one is made in germany but can't find them online in Europe while I see the all over ebay in the states. Crazy
cheers
Dax
I also had to install an aftermarket one to get the spoke LED's to work correctly. All functions on my car work fine.
Autoatlanta.com
QM
what I do best here at autoatlanta is give FREE and ACCURATE 914 tech advice. I am now making some YOUTUBE videos so that when I die the knowledge is not lost.
Everyone SHOULD have a copy of DR 914 book. Lets you cut the the problem
You can always go with EP26 which is LED-compatible and pin-compatible.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)