Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Charcoal Canister Install on '75 1.8

Posted by: Rick986 Sep 23 2021, 11:34 AM

Does anybody have pix of the correct factory install of the canister on an original '75 1.8L? Thanks!

Posted by: Steve Sep 23 2021, 11:37 AM

QUOTE(Rick986 @ Sep 23 2021, 10:34 AM)

Does anybody have pix of the correct factory install of the canister on an original '75 1.8L? Thanks!

Check the originality forum

http://www.914world.com/bbs2/index.php?showtopic=108524P

Posted by: rfinegan Sep 23 2021, 11:49 AM

I have been using the battery hold down bolt to keep the Canister in place on my 75 1.8.
Sure would like to know where its mount for sure though...

Posted by: Steve Sep 23 2021, 01:37 PM

QUOTE(rfinegan @ Sep 23 2021, 10:49 AM)

I have been using the battery hold down bolt to keep the Canister in place on my 75 1.8.
Sure would like to know where its mount for sure though...

Not factory, but I mounted mine between the battery and the firewall, to get it out of the way. However my car is a six and i do not have the 4 banger ECU there.

Posted by: bretth Sep 23 2021, 03:55 PM

I have seen it on the firewall and on the battery tray for the 1975 1.8. I would like to know which was correct myself. I could see the firewall mount used because the L-jet dual relay looks like it should be on the battery tray and my car has a hole in the firewall area. But then there are a few other non original holes on my firewall too.

Posted by: drem914 Sep 23 2021, 05:11 PM

QUOTE(rfinegan @ Sep 23 2021, 10:49 AM)

I have been using the battery hold down bolt to keep the Canister in place on my 75 1.8.
Sure would like to know where its mount for sure though...

That is how mine arrived. Not sure if it is correct though as I was not the orignal owner.