Changing my race car into part time street use. Re-doing the interior but want to keep it fairly sparse and business like.
Has anyone ever fabricated either an aluminum cover or maybe a fiberglass cover for the center tunnel? I want add as little carpet as possible. Seeing some of the Stinger 911 cars with a fiberglass center running the length of the tunnel gave me ideas.
If no one has ever tried this, I will start getting quotes, just didnt want to duplicate someone elses efforts.
Same sort of idea, just over a custom base. I removed the factory tunnel and made a 1.5" x 1" steel frame that's then covered with a removable steel cover. I used 18 ga for the cover, probably should have used 20, just for the weight savings. I'm thinking of pulling a mold of the cover and duplicating it in fiberglass or carbon fiber.
Attached thumbnail(s)
Are you meaning "Singer 911"? If so, your best bet would be to study the myriad of designs that Tygaboy built - all for the same project, too!
His thoughtful insight goes beyond anything Singer puts out (jmho)...
Good luck!
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)