Printable Version of Topic
Click here to view this topic in its original format
914World.com _ 914World Garage _ 911s and 914s
Posted by: emerygt350 Oct 30 2021, 04:45 PM
Probably going to be thrown out of the PCA and banned from the narp club but I think the styling of the car on the right was dead on...
It's just so rebellious for a 914 and so much more interesting than modern 911s.
Posted by: Van B Oct 30 2021, 04:48 PM
The 935 slant nose was a high point of Porsche design for sure. But going slant nose comes with some obligations. The car has to be fast and difficult to control IMO.
Posted by: burton73 Oct 30 2021, 05:08 PM
Back in the day, like 1979 when I got my first 914, the Chalon had a great look to me. That was the bodies from Mitcom with one of their Advertising paint schemas.
Later when I learned that bad fit parts or paint or cars looked real bad.
The body design is something that I think from the cars that came later this is kinda where the 914 was going. Lots of people think the Chalon is total crap in design.
Bob B
Posted by: emerygt350 Oct 30 2021, 05:29 PM
Yeah, it is too bad quality was poor on aftermarket. Mine has one of those mitcom color schemes and is from near where mitcom was operating and considering the only previous owner.. I suspect it is a mitcom job.
I just have a soft spot for that late 70s early 80s design. If the 914 had survived to see it, I would like to think it would have looked like mine. And not like a 924. Not saying the 924 looks bad, just not the same car.
Posted by: lesorubcheek Oct 30 2021, 06:19 PM
The Chalon kit certainly had me salivating back in the day! Here's a page from a 1980 Automotion catalog.
Dan
Posted by: 914Sixer Oct 30 2021, 06:20 PM
The year was 1989. I had to have one, so I built it.
Attached thumbnail(s)
Posted by: emerygt350 Oct 30 2021, 06:33 PM
That's awesome, a chalon for the 90s too.
Posted by: Maltese Falcon Oct 30 2021, 08:35 PM
Yeah, it is too bad quality was poor on aftermarket. Mine has one of those mitcom color schemes and is from near where mitcom was operating and considering the only previous owner.. I suspect it is a mitcom job.
I just have a soft spot for that late 70s early 80s design. If the 914 had survived to see it, I would like to think it would have looked like mine. And not like a 924. Not saying the 924 looks bad, just not the same car.
Mitcom's (Allan M.) HQ was on Santa Monica Bl. West L.A., afaik thier "Chopper-gun" glass shop was on Broadway in Gardena.The QC on the glass was decent>>not perfect, probably because the body shop would fit + finish each car. Side note; Mitcom built body parts for many teams 911RSR, IROC, 934 & 935 of that era.
Posted by: KELTY360 Oct 30 2021, 10:21 PM
I don't hate it, but consider that Porsche thought the fenders of early 911s and the 914 were important as markers for car location in corners. They obviously abandoned that cue later on but I guess that was part of the evolution.
Posted by: emerygt350 Oct 31 2021, 06:30 AM
I put my lights up like the Miata folks once during autocross, I thought it was helpful.
Posted by: barefoot Oct 31 2021, 07:24 AM
Well, I know is't blasphemy to the real NARP crowd, but I kinda like my somewhat customized version.
The accordion look aft of the front bumpers is gone, & the rear fender cut-outs are a very good place for an aux oil cooler.
Barefoot 
Posted by: emerygt350 Oct 31 2021, 07:30 AM
What does your front valence look like. I have suspected that it might be possible to date the kit based on the design.
Posted by: AZBanks Oct 31 2021, 10:34 PM
I have always liked the Chalon kit, I guess that is why my next 914 project is getting one.
In looking at a LOT of Chalon pictures, the one thing I've noticed is that they don't look good with normal 914 tire sizes. They look like clown cars with tiny wheels. The fender openings are much bigger than the stock 914 fender openings so they need much bigger diameter wheel/tire combo's to really look good.
Clown Car:
Not Clown Car:
Barefoot, IMHO, Your wheels and tires are big enough but I think you need spacers to push the rear wheels/tires out closer to the edge of the fender.
Posted by: Optimusglen Nov 1 2021, 07:42 AM
Generally, when done well, I kind of like the Chalon kit, the only thing that throws me is the Chalon side skirt treatment. It doesn't flow well with the rest of the design.
Posted by: mepstein Nov 1 2021, 08:24 AM
I wanted one back in the 80's.
Once you see how the kit is installed, they are less attractive.
Posted by: Root_Werks Nov 1 2021, 11:13 AM
I wanted one back in the 80's.
Once you see how the kit is installed, they are less attractive.
Really wanted one back in the early 90's until a buddy of mine bought one in the late 90's. It looked good, but removing so much metal on a unibody car is noticed. Not in a good way.
Well done kits seem pretty rare these days. Almost a piece of history.
Posted by: burton73 Nov 1 2021, 12:59 PM
The Chalon kit certainly had me salivating back in the day! Here's a page from a 1980 Automotion catalog.
Dan
This is what I am saying, IMHO the paint scheme works great with this car as far as the lines go. I would remove and put on real factory 924 or 911 bumpers and rubber acordian ends because that is what ages poorly and look fake in the glass. If the pieces are too long cut and have someone weld then shorter.
Bob B
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)