Printable Version of Topic

Posted by: hndyhrr Nov 17 2021, 08:30 PM

Does anyone sell the hose/tubing that goes from the windshield washer bottle across and into dash and then into steering assembly?

Is this something I can get local? If so any particular size, thickness etc.

Thanks

Posted by: wonkipop Nov 17 2021, 10:48 PM

QUOTE(hndyhrr @ Nov 17 2021, 08:30 PM)

Posted by: hndyhrr Nov 17 2021, 11:00 PM

QUOTE(wonkipop @ Nov 17 2021, 08:48 PM)

QUOTE(hndyhrr @ Nov 17 2021, 08:30 PM)

Does anyone sell the hose/tubing that goes from the windshield washer bottle across and into dash and then into steering assembly?

Is this something I can get local? If so any particular size, thickness etc.

Thanks

here is a thread on it mate. might help.

http://www.914world.com/bbs2/index.php?showtopic=354138&hl=

think it might be mentioned in there for a USA source.

Thank you

Posted by: DRPHIL914 Nov 18 2021, 09:55 AM

914rubber has a kit wit tubing etc, but your local FLAPS should have some that would work as well

Posted by: PDXBob Nov 18 2021, 01:04 PM

I just replaced my rubber tubes for windshield washer. I got 4 mm (inside diameter) rubber tubing from local parts to work and doesn’t leak- so far.
PDXBob

Posted by: RiqueMar Nov 19 2021, 05:32 PM

Agree with thew two-above. I originally got the 914rubber kit, but supplemented it with some material (same stuff) from a local autocrats store - all pretty straight-forward.

Posted by: Mikey914 Nov 23 2021, 01:21 AM

Our kit also uses a heavier duty material. It's basically a mix of rubber and plastic. feels more like rubber, but can be thermally set. Meaning that you can heat it up and pish it onto the fittings and it will stay.

The kit is all the way from the stock at the steering column to the squinters

https://914rubber.com/water-squirter-hose-kit-of-6-1


Attached thumbnail(s)