Yes im making parts faster than we can get them listed. Just got these bad boys done.
What you are looking at it a correct style early metal bolster top and OEM style door cards.
Also made some new door pockets that fit perfectly onto the top band of the smugglers box on the driver's side.as well as the passenger side lower sections.
We made these out of plastic. Will be offering these up too.
Lastly found some vinyl in Germany that is close to the original pattern. We will be still stamping the correct versions. They are just significantly more expensive.
Thinking we can offer up a Group buy for plug and play door cards in the most complete form,.
Good news is that the fiberboard is less expensive and easier to work with, so we will be able to offer up some great pricing.
I anticipate bringing these to GB by end of January.
Will jave the white, black, brown and tan panels ready to ho soon.
Ill post up more pics and finalize the GB price after Christmas.
So who's interested?
Mark
Attached thumbnail(s)
Attached image(s)
Mark,
I thought you sold a fiberglass or plastic backing for the door panels?
If so could that be a upgrade option?
I need a set so lmk on this.
Thanks,
I like the tan door cards….
Attached image(s)
Definitely interested …
@http://www.914world.com/bbs2/index.php?showuser=3348
i would be in for a set, brown probably, but, question: do you have any scrap tartan material? id like to do a set of door cards with top edge vinyl just like these but lower in tartan(either orange targan or black/white).
Phil
In in for a couple door pockets and pass side under-thingys. Two of each, please.
I’m looking to replace both door interior panels in Tan and replacing the arm rests. Plus I’ll need new window winders.
Well the food cards be covered?or do I have to do that ?
@http://www.914world.com/bbs2/index.php?showuser=3348
SO you will notice the cage nuts are preinstalled for the passenger side door panels
All holes are precut, and the winder and door handle areas are precut. making these easy to install.
My 1st set out of the gate
-The door pockets will be available shortly. I will do a separate GB so you don't have to buy my panels to get them
The brown and tan are a little more expensive as we had to import material.
Can do the late style vinyl also they will still fit.
Attached thumbnail(s)
@http://www.914world.com/bbs2/index.php?showuser=3348
Are you making both early and late door cards? The early cards are smaller and show part of the door when it is closed.
The plastic are the late style, the early ones are made just like the early, they are interchangeable.
Will my existing arm rests and map pockets fit these? Also, I'm not clear on your above statement re: plastic door cards. I thought these were the fiber material pictured???
OK. I'm up for a set in black
Please enlarge the pics to show the three top upward pointing mounting clips.
You can’t see much with the vinyl attached. What is it you want to see?
Does this help? May be easier to see without anything attached?
The second file is big enough you can zoom in.
Attached thumbnail(s)
Hey Mark, do you have the complete upholstered door cards in early black brick mold available now? I don’t see them listed on your site.
Do the panels come covered ? And, is the top done like the originals.
As I said earlier, I’m in for tan
Do the panels come covered ? And, is the top done like the originals.
As I said earlier, I’m in for tan
Attached image(s)
Hi Mark, I'm interested but need 73 black brick pattern vinyl. Is that sold separately or already fitted?
Thanks Nick
I'm interested in a set
I'd like a set for a '74 in brick mold black.
If you're doing just the bare door cards then I'm in
Not totally clear on exactly what I need butwillbeinterested in GB for set of early ones when it happens
TOT
Thanks guys, I just finished the metal and cards. You are looking at the 1st of the panels we assembled. We will be starting full production after the holidays
Do,
Post up what you want wand we will start working on these 1st.
We will be selling the full door kit only at this time.
I am in for 1 set of early brickmold, black
Thanks and happy holidays!
I’m in for a pair for my 71, black please
I'd like one set please. Black brickmold for a 1974 2.0L.
I need black for my '73. Damned if I know which pattern it needs!
I would like a set in black of the late style vinyl (1975). Basket weave?
Thank you
I'm in for a black set '73-'74 style!
Looking for a pair of 1970 style black smooth grain as long as the top pad roll matches OE dimensions. Bought a pair out of Germany a couple of years ago and the top roll was about 1/2" too tall.
I’m in for a set, black. Please
I'm in for a set of black door panels with the plastic backing.
I'll figure out the material it needs to be and update this later on.
I’m in. Black pair for a 70, as original as possible.
I am in for a set for my 74
Interested in black smoothish for a 71. Do you sell the top piece by itself?
I'm in for a black set for my 74. With door pocket.
Are these available with the 75-76 basket weave for my 76? If so I am interested in a black set.
Yes can even do white tan and brown in the "basket weave" late.
Mark,
I'm in for an early set of black brick pattern.
Thank you
Craig
When can I place my order ? on the website ?
Well, trying to get some back stock on these so the waiting is minimal.
I went off on my own path again. Wound up taking more material than I thought it should as to mirror the pattern. Because of pattern having 2 small and 1 wide stripe I had to cut and flip it making me use about 1.25 yards. Yes, I have some drop, and if I did more it gets more efficient, but ouch.
The material is a little finicky to work with. you can't stretch it much or it distorts the pattern, but you have to pull it straight to make the lines look good.
What do you think??
Now I wonder what the pockets would look like if I can make them look good?
Attached thumbnail(s)
Attached image(s)
I'm interested for a set of door panels for my 73. Most likely in black. Is it possible to get a small sample of the tan to see what it looks like?
I only have the small sample pictured on the 1st page. At least until my shipment from Germany comes in.
Mark
I'm in for a set of 74s!
Hi Mark,
Put me down for new door panels
I could use a whole interior! Carpet, seats, dash etc.
one of the early owners added door speakers sadly
Thank you,
Henry
Attached image(s)
Mark - I've seen a few requests in this thread for a set with the black basketweave used in the 75's. Is this an option? If so, I'll take a set. I've already gone in on the pockets.
-Thanks,
DaveB
I'm in for a set of black 1974.
Those black tartar look good. Just might consider getting a set in green tartar if you have it.
I'm in for a set of black basket weave for my 76.
I would be interested in a set of brown ones with hole for window crank and door pull. Also looking to just have gt loop pull instead of pockets and handles
I bought the black plastic door cards, and have them out for upholstery right now, RS style. I just need the top metal bolsters.
Hi - yes I'd like door panels for 1974.
Probably tan - maybe black.
Could also use the driver's side smugglers box
and the passenger side armrest.
Thanks
@http://www.914world.com/bbs2/index.php?showuser=3348
Will you have these in the late beige basketweave?
I actually need to redo my entire interior, but late beige appears to be an unavailable option for all the upholstery parts on your site right now.
Gord
Yes the late beige is no problem.
Mark
I am in for a set of plain black.
Bought a new 76 that needs black door cards please… PO put in door speakers!
I am interested in a set of black late basket weave for my 75
Mark - I'll like to buy a plaid set with your Matisse-Blue Tartan Nr. 80. I'm ordering a set of seats from you too in this same configuration. I can always pick it up, it's always fun to see what you have in the pipeline.
DaveB
In addition to the black pair for a '73 I'm also going to need a pair in tan for a '76.
So we have made up most of the panels that everyone has asked for. We just got the tan and brown in finally. As soon as the codes are made up will will be able to open this up, and ship quickly for the black ones.
I'm a bit late to the party, but possible to get a set of black basketweave for my '71?
turned out pretty dang good!! thanks Mark!
Attached thumbnail(s)
Where can I find the boxes? They are not on the website?
Clay
I'm in for a set for my 70. No pockets, etc, this car is a lightweight. Just needs to look good and be inexpensive.
Count me in for a set of Early (1970) in black please!
The black/white plaid looks awesome! Have you arrived at a price yet?
$390 GB price for plaids
How much for a set in black on a ‘75? Mine currently has the drivers door pocket. I’ll confirm everything tomorrow as the car is at my shop.
Thanks!
I'm in for a set of early black ones
Is it too late to get in the GB for a set for a '74 basketweave, black?
@http://www.914world.com/bbs2/index.php?showuser=3348 Supply chain problems must be giving you nightmares Mark. I wonder how many more of us want to give you $$$$. I'd like to give you another $1500+ once you get restocked.
Is there still an opportunity to get an early set, smooth for a 1970, in black?
Yes we just got caught behind the curve on these.
I had a few guys that needed these right away and called the office and we got them covered, but it creates issues with trying to get enough made up.
I do have many sets made up, and we are cutting and forming more metal for for these now. I'm heading into the office to see what we can break off on these right now. I just didn't want to open up the flood gates, and not be able to take care of everyone.
-Mark
Jim,
Do you know the actual vinyl that was used? I know you need it matched.
Count me in for a set of tan door panels (have a 73 so I think early is correct).
Thanks,
David Bohon
Blake is contacting everyone now on the list in groups of 10 as we work our way through the list. We will close this out as soon as we get to the end. I'm hoping end of the month. Scott had made his way through quite a few of these, and looks like we may be in the home stretch!
Are you going to be getting plastic ones back in stock anytime soon? If not ill need a pair of these. for a 73
Mark, If it's not too late. I'm in for a pair of black brickmold for my 1974 LE car.
I thought I remembered adding myself to this list. If not, please add me. Brickmold pattern in black for a 1974 model. Thanks.
Put me down for a set of 1970 black brickmold if this group buy is still going on please!
Are these close to original? if so, I will take a set of black brickmold for a 1975. thanks
Also in for a set of Late black basketweave if possible.
I would like a set of 1971 smooth if the group buy is still available.
We aren't making the pull and the top of the smugglers box yet, but yes I can get you the bases. I may have a used one I can pull from a car if you need one to complete your project. I'll check and get back to you.
-Mark
Mark, Is this GB still open? If so I could use a set for a '74
Will be closing tomorrow. Let @http://www.914world.com/bbs2/index.php?showuser=24141 know if there are any other takers or anyone that has not received a code.
I've had Blake handling this as I've been doing the all-nighters to ANC and back and have been nocturnal.
Thanks All!
Mark, are these still for sale on group buy, If so, I'd like to buy a set for 74
I'd like a black pair for 74. Thanks.
As long as you have the request here before midnight you will get a code that you will have a few days to activate.
Mark, this might be a repeat message to you from yesterday.. I would like to buy a set , please include me on the group buy. Thanks Mal Hickok
I would like to get a set of black smooth panels for a 71 if they are still available. Thanks
Got ypu both there. Blake will forward codes to all that have digned up before midnight on the site. West coast timr.
I PM’d but no code
@http://www.914world.com/bbs2/index.php?showuser=24141
Picked up my panels today. I'm really dig'n this matisse blue plaid colors.
DaveB
@http://www.914world.com/bbs2/index.php?showuser=3348 still waiting for a pair for our Magna red car… we have been excited to get these and a stock black set for our 73.
any news?
Just finished up doing all the blanks for this. You are one of the last 9 that will be complete this next week. We had no idea this would be so big over 80 sets of door panels!!!!!!
We have the process down now (practice makes perfect), and I will be helping Scott finish these up.
-Mark
Just finished the passenger side. The pre-drilled holes in the card,butylt to attach the vapor barrier made this a fantastic install.
Big ghz kid to 914Rubber
Attached thumbnail(s)
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)