Some of the old vinyl is peeling off around glove box, knobs etc. I’ve searched and I haven’t found anything that seems to really work.
I have had good luck with the 3M spray adhesive, believe it is a contact cement. Got it at Home Depot.
You might want to watch @http://www.914world.com/bbs2/index.php?showuser=18749 's video.
https://www.youtube.com/watch?v=uP1IA944nyM&t=7s
Thanks man. Dap/Weldwood landau top contact cement is my go to. Nasty stuff that you'll need a respirator to use...but holds like nobody's business.
I also like DAP, and you can find it in spray cans.
Old school DAP Weldwood contact cement will do the trick.
It stands up to the summer heat in Vegas without losing grip.
Yes, contact adhesive where you apply it to both pieces and let them dry a bit before placing them together.
2nd the Old School Weldwood- now Dap- adhesive. Did you ever notice where it says to stick both pieces together "wet" for permanent installation?
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)