Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ 914-6 gearbox questions

Posted by: sixaddict Feb 12 2022, 03:41 PM

I was under impression that 914-6gearbox was numbered 750xxxx or 751xxxx for 70 and 71, respectively.
Is that correct ??
Also….what can be done to restore/refresh appearnce of case
Thanks

Posted by: johnhora Feb 12 2022, 04:07 PM

T...I think you're correct...here is a chart on them...my 70' 6 trans is 914/01 #7501731

what up with the appearance on your trans...you could do the dry ice thing or soda....it just get oil under there anyway smile.gif

Attached Image

Posted by: mepstein Feb 12 2022, 05:04 PM

A steam pressure washer does wonders. Mag wheel cleaner and a brush is a good diy. Soda or dry ice is fine for a running trans.
I don’t use any abrasive media unless the trans is coming apart.
Be careful with mag in an ultrasonic cleaner. It can break it apart.

Posted by: sixaddict Feb 12 2022, 05:44 PM

Thanks guys

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)