Hi all,keen to see how you guys clearanced the fins to make fitting/ removal possible with these covers.
The set I have I bought used for a great price,once received from seller I noted 1 cover had about half the fins milled down about 5mm....could they have come from a "6" conversion ?...reason for asking is I believe in a 911 application they need no milling down .
I don't have access to the car @ present so how do I tell left from right ?,trying to work out which one ?,have issues with my mag ones and frankly getting pissed off with oil leaks which are mainly it this area.
TIA cheers,pics would be nice as I like them and they would help .
Thanks Pete and John,John your comments sound right to me,not fussed about pulling studs as in the future it could be an issue after many valve clearance resets,I think they are right milled spacing due to cyl offset on these motors.
Pete the seller of these had no idea what they were worth or what they came off for that reason I didn't ask any questions and I won his auction and payed $100nzd for them .
More pics and info please TIA.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)