What’s the best sealant to seal the shims and cylinders to the case?
Curel T is what I used.
I am stuck in dark ages and use Permatex Aviation sealer.
I used Permatex Copper. From cylinders, to heat exchangers, to Harley exhaust, it hasn't let me down.
That rather expensive orange stuff, and I forget the name. Ford engine lube is real good smelly stuff for bearings, but don't get it on the cylinders.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)