Hello
Can anyone one ID this valence 4 or 6 ?
Thanks
Attached thumbnail(s)
The answer may be here:
http://www.914world.com/bbs2/index.php?showtopic=113567&hl=VALANCES
I can’t measure anything for ya, just looking online at pics.
Yours looks to be a 4 hard to judge, here’s a six. What do ya think. Maybe a real six owner can measure for ya.
Attached image(s)
That's a 4 cylinder valance; here is a picture of my original 6 valance:
Funny enough, I have read (but cannot confirm) that the -4 porthole valance fits a 914-6 that is using a 911 muffler!
--DD
I do not know.
Dave,
I am guessing your right about the 911 muffler fitting the 4 valance. The only difference in the mufflers was the angle of the bend. The hole on the 4 might have been coincidental with the slot of the 911 bumper.
I've never had an early 4cyl. valence but have seen plenty of pictures that tell me
compared to a 6 cyl. the hole is smaller and further inboard.
four
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)