Printable Version of Topic
Click here to view this topic in its original format
914World.com _ 914World Garage _ Anyone seen this gauge before
Posted by: Jett May 13 2022, 06:32 PM
Head temp and gas?
Attached thumbnail(s)
Posted by: Freezin 914 May 13 2022, 06:40 PM
I have not seen one of those, pretty neat!
Posted by: emerygt350 May 13 2022, 06:43 PM
That's oil temp not head temp.
Posted by: emerygt350 May 13 2022, 06:45 PM
That is a great gauge though, brake, generator, oil lights, now if it had oil pressure...
Posted by: Chris914n6 May 13 2022, 08:18 PM
Just a stock oil temp gauge but redone with numbers instead of the graphic.
Posted by: Steve May 13 2022, 08:24 PM
It Looks like they took the Oil Temp part out of a 911 gauge and put it in a 914 gauge
Posted by: targa72e May 13 2022, 10:22 PM
I think I will be seeing a similar gauge soon. Steve is correct 914 with 911 temp. I have this in my -6 conversion. My current gauge looks like this.
I just got the numerical temp part this week, 911 orientation but price was right. May switch around so lettering is like gauge pictured at some point in future
john
Posted by: 914Sixer May 14 2022, 06:21 AM
About 10 years ago I had one made at NHS. Stock gauge and I had them put horizontal temp scale on it. I sold it and went with a 911 combo gauge. The gauge shown maybe it.
Posted by: Jett May 14 2022, 08:18 AM
Thanks… makes sense. I have one of these gauges NOS, might be fun to replace the scale.
Posted by: Montreal914 May 14 2022, 09:11 AM
john
Is this where you got your gauge faceplate?
https://www.heiler-tachodesign.de/Oil_1_s1
Posted by: dr914@autoatlanta.com May 14 2022, 09:26 AM
HARTMUT AT Palo Alto speedometer can make one for you
Posted by: targa72e May 14 2022, 09:46 AM
I got it from John Bell on pelican. He also makes triple, quad and other custom gauges. he goes by jbell959 on pelican. He had extra stock gauge plates from making custom gauges and redid them with numbers.
This thread shows some of his work.
http://forums.pelicanparts.com/porsche-911-technical-forum/1080586-custom-quad-combo-gauge-3.html
john
Posted by: Montreal914 May 15 2022, 08:45 AM
Thank you for the link!
Beautiful work from John Bell! 
Posted by: Jett May 15 2022, 08:46 AM
Thank you for the link!
Beautiful work from John Bell!
+1 but need to wait for the winter break before he starts making more.
Posted by: StratPlayer May 16 2022, 04:32 PM
Yes I have that module in my gauge cluster. Ordered it from a vendor who I can't remember who years ago. Oil Temp
Attached image(s)
Posted by: 914werke May 16 2022, 05:11 PM
Thats Purty!
Posted by: Jett May 16 2022, 06:11 PM
Yes I have that module in my gauge cluster. Ordered it from a vendor who I can't remember who years ago. Oil Temp
Looks good. North Hollywood will convert one, and it does look cool.
Posted by: jbell959 Oct 5 2022, 07:03 PM
I don't own a 914 so I don't get on this board much, but I've made several custom 914 gauges recently so I thought I would post a few pictures of some of the fuel combo gauges I've done.
Attached thumbnail(s)
Posted by: jbell959 Oct 5 2022, 07:18 PM
I can also do them in the earlier off-white color like this 914-6 reproduction
Attached thumbnail(s)
Posted by: 914Sixer Oct 6 2022, 08:07 AM
John does all my work, excellent quality, highly recommended.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)