Been working on these for awhile, and after some additional modification to the tool will be launching a GB. Still working on these so the cost is still TBD, but you all know me. I will keep it reasonable.
Wanted to share progress and see who might be interested.
Anticipate starting production in June, just need to make modifications to the tool for hole size, as the holes have shrank too much (material has grown some).
Will be corrected and ready soon.
Mark
Attached image(s)
Yep, a previous owner totally messed these up on my car with some kind of solvent near the windshield. I definitely need a set.
As of now, do not need a set. But I would like to thank you and your team for all you do for this community. We all appreciate it very much!
I would be interested in purchasing a set. Thank you!
I'm def in for a set!
I need a set also please.
Dittos, I'm in for a set as well.
Cheers!
Chris
Put me in for a set. Thank you
In for TWO sets
Oscar
Potentially in for a set!
Yup one set
I'm interested in one set.
Mark,
Please put me in for two sets. Thanks!
I'm in for a set.
One set for sure and possibly a second set
Mark, are these the same for all model years? I'm a definite maybe, lol. With my retirement fund dropping daily I don't know whether it is better to get parts now or suffer the consequences. And +1 thanks for all you do to support our cars!
These are the same for all years.
As far as now or later, we typically make the GBs worth the initial as it's a product launch.
Mark
I'd like a set
I'll take a set.
Are 2 required or only 1 ? I assume it’s the interior forward bolster ?
These are both left and right. Just showing the drivers so far.
I'm in for a set. Thanks!
DaveB
I'm interested.
add me to list for GB
john
I would be interested in a set.
Thanks, Ken
oh yea! this might be the only part i have not been able to replace in the interior. you're getting close to being able to provide a complete interior update/renovation kit for the interiors now!!
Put me down for 1 set.
I am in for a set. Thanks, Mark.
I'm in for a set please.
I'm in for a set!!!!
Ill take a set.
@http://www.914world.com/bbs2/index.php?showuser=3348 Curious if you ever get the issues with the targa bar pads sorted out? Still looking for a good one.
I'll take a set
I'm in, I'll take a set
Subscribed
Don’t ‘need’ anything but I’ll do a set!
Mark, I'd be down for two sets.
In for a set
Looks sweet! down.
Mark,
I’m in for a set.
David
I could probably use a set.
Put me down for a set. Thanks again for all you do to support our cars.
Mark,
If you haven't already, put me down for a set please.
~Fred
I'd like a set also please.
Still working on these, and working a lot at the day job too that slowed these up a a bit.
The holes are slightly too large for the two lower screws. Adding some metal to the mold and have to re-machine. Should be another 2-3 weeks, but wanted to update. Other that that I have a set on my 72 and with a dob of butyl they stay in, but that's not cool for production so biting the bullet to make these right.
Attached thumbnail(s)
Add me to the list for one set
Add me to the list; I’ll take a set.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)