Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Slippin in a 6

Posted by: Markeydoo Aug 3 2005, 10:08 PM

Ok it's time for a change. I am installing a 6 with weber 40 carbs. I don't have the original fule pump so what is a good replacement? I know the pressure should be around 3.5 pounds but I dont know what else it needs like gallons per hour. I am also looking for the part number of the original pump.
Thanks
Mark

Posted by: echocanyons Aug 3 2005, 10:13 PM

I hear a peirburg pump to a continuous loop circuit with a bypass regulator recirculating back to the tank is a good method

Posted by: ! Aug 3 2005, 10:24 PM

Rotary pumps....Purolator, Holley etc...

Posted by: trekkor Aug 3 2005, 10:40 PM

I have been using the Holley Red low pressure pump and one-in-two-out pressure regulator since January with *zero* problems.

KT

Attached image(s)

Posted by: trekkor Aug 3 2005, 10:42 PM

Reg.

KT

Attached image(s)

Posted by: Markeydoo Aug 4 2005, 09:58 PM

Thanks Guys.

Posted by: North Bay 914 Aug 4 2005, 10:50 PM

Did you get the Throttle cable yet?