Does anyone happen to know the valve lift from a stock camshaft and rocker arms for the 2.0 Type 4 motor? The Haynes manual gives specs for camshaft opening and close, but nothing about lift. Thanks.
I measured 0.272" cam lift from a 40 yr old GA 2.0 cam, so probably warn a little
Thanks. Is the rocker ratio 1.5 for a stock 914? That would equate to .408 valve lift. which seems reasonable for a stock 2.0. Thanks again.
1.3 : 1 stock
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)