Printable Version of Topic

Posted by: Literati914 Jul 12 2022, 06:30 PM

I found 11 of these small bolts while going thru extra parts, one of them had the small sleeve (red arrow) over it. There is a prominent dimple in the top of the hex head. Anyone recognize these bolts ?


Attached thumbnail(s)

Posted by: ctc911ctc Jul 12 2022, 06:38 PM

Engine Bay torsion Rod Bolts?

Posted by: Literati914 Jul 12 2022, 08:13 PM

I think the bolts there, are built in to the chassis, and sticking up so that you just slip the retaining brackets over and add the nut.

Other ideas?


.

Posted by: 914Sixer Jul 12 2022, 08:18 PM

Nothing I have seen in the last 30+ years.

Posted by: Literati914 Jul 12 2022, 08:22 PM

That's good enough for me, thanks.


.

Posted by: 9146GUY Jul 13 2022, 07:07 AM

They sort of look like ring gear bolts. The ones that lock with a tab and hold the ring gear on the diff.

Posted by: Root_Werks Jul 13 2022, 07:57 AM

Remind me of flywheel bolts the one "cap" bolt looks like a plug to something? Don't think they are 914 related.

Posted by: bdstone914 Jul 13 2022, 05:48 PM

I agree with the ring gear bolts.

Posted by: windforfun Jul 13 2022, 06:05 PM

You know, IMHO, you have to do a "hats off" to the guy who designed & tested these things. Were these developed with FEA software?

Posted by: Superhawk996 Jul 13 2022, 06:20 PM

I think 1st commercially available NASTRAN software (early FEA) wasn't available until 1969. Highly doubt it's use here since 914 and/or 901 transmission designs were already well established prior to 1969.

Posted by: 904svo Jul 13 2022, 07:25 PM

that looks like 901-102-025 for a 6 cyl engine