Printable Version of Topic

Posted by: Not_A_Six Jul 15 2022, 05:09 PM

Hi All-

When I purchased my 914 years ago, it came with a box of goodies. In the box was a set of these hubcaps. (The car had 5-lug Fuchs...)

There is no Porsche p/n on them, so I assume they are some kind of reproduction. My guess is that they would fit some kind of steel 914 wheel, but I'm not sure.



Anyone know what these are and what wheel they fit?

Any ideas what they are worth?

Thanks.

Posted by: Not_A_Six Jul 15 2022, 05:10 PM

Here is the back side:

Posted by: 914sgofast2 Jul 15 2022, 05:12 PM

Those are not for a 914. Maybe a late 356 or early 911 steel wheel.

Posted by: fixer34 Jul 15 2022, 05:23 PM

If you don't want them, I'll work something out with you. They fit on 5 lug 'steelies'

Posted by: JmuRiz Jul 15 2022, 05:39 PM

They look similar to 356c caps, but those are 9” diameter. Those look 8.25”

I they are 9” I’d love a spare set to modify and fit on my 951 spare tire wheels

Posted by: Not_A_Six Jul 15 2022, 06:01 PM

Thanks @http://www.914world.com/bbs2/index.php?showuser=17908 and @http://www.914world.com/bbs2/index.php?showuser=50

As near as I can measure, the max diameter is 8 7/8" with a flat ruler, or 9" following the curve of the cap with a flexible tape measure.

I have no use for the set of four. Any idea what they are worth?

Posted by: fixer34 Jul 19 2022, 03:35 PM

Here's what my factory steelies look like. Appears to be the same cap. I have a full set, but figure it never hurts to have extras.