Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ fuel tank inlet and outlet pipes orientation

Posted by: copilot Aug 13 2022, 10:24 AM

I have removed the fuel tank from my '75 to replace it with a new tank. Took photos of how everything was put together except the inlet and outlet pipe orientation.

I have looked at the existing forum posts and photos and I have seen these pipes in different orientations. Parts diagram shows them pointed away from the centre of the car.

A photo of the OG positioning would be really helpful. Thanks.

Ron

Posted by: 914werke Aug 13 2022, 02:15 PM

Doesnt really matter except to avoid kinking either line you want them to angle too follow the coil of the line(s) in thier relaxed position (not pulled to the top of the bulkhead) if that makes sense...

Posted by: Puebloswatcop Aug 14 2022, 10:42 AM

This is the only picture I could find in the manual. Its not the greatest, but it does give you a visual reference of how the factory did it. Hope its helpful.

Posted by: copilot Aug 14 2022, 08:38 PM

Thanks for the replies.