Printable Version of Topic
Click here to view this topic in its original format
914World.com _ 914World Garage _ 914-6 Restoration seen today at C&C
Posted by: jim_hoyland Oct 29 2022, 12:55 PM
Cal brought his grievous -6 restoration to C & C in Tustin today. Parts of work was done at Cary’s shop and later at Ben Martins.
Added to VIN database
Attached thumbnail(s)
Attached image(s)
Posted by: jim_hoyland Oct 29 2022, 01:02 PM
Hopefully Cal will chime in and give more details.
Posted by: Cairo94507 Oct 29 2022, 01:25 PM
Nice to see another 6 on the road. Is that a full cage? 
Posted by: raynekat Oct 29 2022, 04:18 PM
We in Oregon don't speak of Ben Martin any more.
Cary's work was always the best.
Posted by: davenorcal Oct 29 2022, 05:37 PM
We in Oregon don't speak of Ben Martin any more.
Cary's work was always the best.
@Raynekat-Why do you say this?
Posted by: rgalla9146 Oct 29 2022, 07:11 PM
Cal brought his grievous -6 restoration to C & C in Tustin today. Parts of work was done at Cary’s shop and later at Ben Martins.
Added to VIN database
Gorgeous yes ! ..... Grievous ? no.
Posted by: raynekat Oct 29 2022, 09:17 PM
We in Oregon don't speak of Ben Martin any more.
Cary's work was always the best.
@Raynekat-Why do you say this?
PM....and I can tell you.
Posted by: flyer86d Oct 30 2022, 05:39 AM
What does it have for an engine? It reminds me of Chris Worley’s old car. Similar rear flares. Nice!
Charlie
Posted by: mb911 Oct 30 2022, 07:01 AM
We in Oregon don't speak of Ben Martin any more.
Cary's work was always the best.
Oh no why is that?
Posted by: calcoatsworth Nov 1 2022, 03:26 PM
finally a chance to reply:
It's an original Six that I have owned for nearly 40 years. When I bought the car it had been repainted, had a 911 E motor and the original 14” Fuchs were stolen, so in my mind there was no need for originality. Most of it’s life was spent awaiting restoration as life continued on . The start was a custom roll cage (that picks up all suspension points) and all the old school stiffeners (Automotion - Garretson -etc) by Rod Millen Motorsports. After that, my search for someone with a shared passion for the project ended when i met Cary Kutter. We found quite a few things in common with 914’s and my time in SCCA Pro Rally as the nucleus so work began. After Cary’s tragic and sad passing, the project was completed by Ben Martin. The engine and transmission were fully rebuilt by Jeff Gamroth and the team at Rothsport Racing.
The body is mostly stock, but as an architect I had to clean up every detail I could find!
…and finally the details requested:
1970 914-6
15 x 7 Fuchs
Bremtek (period) brakes
Automotion (period) suspension bits
2.4 L “E” motor with MFI (198 hp on the dyno)
Bursch headers and muffler (an homage to my Arcadia / Pasadena upbringing)
Momo “George Follmer” steering wheel (another homage)
….. and lots more little bits by Rod, Cary and Ben
I’m happy to answer anything else.
Posted by: Cairo94507 Nov 1 2022, 04:31 PM
@http://www.914world.com/bbs2/index.php?showuser=26956 - Congratulations on 4 decades of ownership and a beautiful car. I hope you are driving it regularly so people can remember and appreciate these wonderful cars.
Posted by: Jett Nov 2 2022, 09:16 AM
finally a chance to reply:
It's an original Six that I have owned for nearly 40 years. When I bought the car it had been repainted, had a 911 E motor and the original 14” Fuchs were stolen, so in my mind there was no need for originality. Most of it’s life was spent awaiting restoration as life continued on . The start was a custom roll cage (that picks up all suspension points) and all the old school stiffeners (Automotion - Garretson -etc) by Rod Millen Motorsports. After that, my search for someone with a shared passion for the project ended when i met Cary Kutter. We found quite a few things in common with 914’s and my time in SCCA Pro Rally as the nucleus so work began. After Cary’s tragic and sad passing, the project was completed by Ben Martin. The engine and transmission were fully rebuilt by Jeff Gamroth and the team at Rothsport Racing.
The body is mostly stock, but as an architect I had to clean up every detail I could find!
…and finally the details requested:
1970 914-6
15 x 7 Fuchs
Bremtek (period) brakes
Automotion (period) suspension bits
2.4 L “E” motor with MFI (198 hp on the dyno)
Bursch headers and muffler (an homage to my Arcadia / Pasadena upbringing)
Momo “George Follmer” steering wheel (another homage)
….. and lots more little bits by Rod, Cary and Ben
I’m happy to answer anything else.
Thanks for sharing! Glad to see this car on the road!
Posted by: jim_hoyland Nov 3 2022, 02:03 PM
Thanks for adding all the details, it was a pleasure meeting to at C & C at Enderle Center.
Over the past several years we have bee treated to rarely seen 914s and the history of all is unique.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)