Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Parking Brake Cables on a V8

Posted by: andys Aug 8 2005, 04:29 PM

I'm trying to finish up my trailing arms and need to establish the final position of the parking brake cable bulkhead. Since I don't have my motor yet, I was wondering if any of you V8 guys have pic's of how close the cable is to the headers or exhaust pipes. If it's beneficial to have them routed something other than stock, I would like to change it. If there are no clearance issues, then I'll place them in the stock location and be done with it. Thanks,

Andy

Posted by: SpecialK Aug 8 2005, 08:47 PM

Someone here knows the "A" to your "Q". It just isn't me.

Posted by: John2kx Aug 9 2005, 12:39 AM

No clearance issues at all, just put it back together stock.

(drivers side)

John

Attached image(s)

Posted by: John2kx Aug 9 2005, 12:40 AM

pass. side

Attached image(s)

Posted by: andys Aug 9 2005, 09:39 AM

John,

Thanks for the pic's. That's just what I was looking for. That said, the parking brake cables on mine take a distinctly more looping path than your's. Using your example as a guide however, It looks like I'll still be ok.

Andy