My starting point for 914 knowledge really began when I bought my first one. That is the beginning and is the basis for everything I know. Lots of what I know is wrong. My cooling flap return spring has been broken for years and I did not know it. Until I saw how one was supposed to look at a salvage yard yesterday. I forgot to try and take it off.
Does anyone sell just the return spring or is it only as part of the whole flap assembly? I was thinking you could carefully unwind the spring around the rod to get it off or on. Reality might have other opinions of that.
I searched here and a little online but did not find anything.
19640 township road 167
vanlue, OH 45890
Phone: (419) 306-7384
Volkaholic@yahoo.com
try these guys
best bob b
Where is the return spring attached ?
One end is hooked over the tab on the fan shroud right next to where the cable is fastened to the cross-shaft. The other end is hooked over the tab on the cross-shaft that the cable is captured by.
EDIT: Here's a pic of the flaps and cross-shaft from another thread:
--DD
Haven't made the spring yet, but have the boshings, and the U shaped piece hat actuates the flap at the oil cooler.
https://914rubber.com/air-cooling-control-clip-for-porsche-914-and-912e
Attached thumbnail(s)
It seems like that spring would be a challenge to get on. I've never seen a set of flaps that needed one. Seems like buying the whole flap with it on there used is the way to go. Here's some:
https://www.thesamba.com/vw/classifieds/detail.php?id=2587580
Is there a spring on both sides, or just one ?
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)