Printable Version of Topic

Posted by: dr914@autoatlanta.com Dec 19 2022, 11:53 AM

SALE TODAY 24 HOURS ONLY - 914 EXTERIOR MIRROR R91473103910 NOW $150 INSTEAD OF $229.50 expires 12/20/2022 1pm

http://www.autoatlanta.com/Factory-Look-Porsche-Exterior-Side-View-Mirror-914-Parts-PN-R91473103910.html

comes with the gasket and the CORRECT screws

Posted by: Jim C Dec 19 2022, 12:10 PM

Is this early or late? I believe there was a difference wasn't there?

Posted by: DC_neun_vierzehn Dec 19 2022, 12:16 PM

Hi George. @http://www.914world.com/bbs2/index.php?showuser=4947 @autoatlanta.com

I might just be me, but I find the info on the page confusing.

Is this an OEM part?

It says "factory look" in the title, but the description states "factory issue".

Posted by: DC_neun_vierzehn Dec 19 2022, 12:18 PM

It's a good deal either way!

I'm mostly wondering if I'm the only one who thinks OEM when I see "factory issue."

Posted by: Chris914n6 Dec 19 2022, 12:46 PM

brushed chrome?

Posted by: dhuckabay Dec 19 2022, 01:16 PM

Is this early or late? I believe there was a difference wasn't there?
[/quote]

It is a later model

Posted by: friethmiller Dec 19 2022, 02:04 PM

I have one of these. I found the quality of this mirror to be outstanding!

Posted by: dr914@autoatlanta.com Dec 20 2022, 10:40 AM

the company that originally made them for Porsche makes them , but not in Germany any more. They are really identical to the originals but do not have the script on them

Posted by: 76-914 Dec 20 2022, 10:48 AM

If they're the same as the ones that Sierra Madre offers then yes, they are very nice indeed!

Posted by: mb911 Dec 20 2022, 10:59 AM

That is such a good deal

Posted by: Type 47 Dec 20 2022, 12:07 PM

Is there a template/instructions for installing on the passenger door?

Posted by: willieg Dec 20 2022, 12:11 PM

@type 47
There is a thread on 914World about the installation of a mirror on the passenger side. A finicky process but IMHO, well worth it.

Posted by: Type 47 Dec 20 2022, 10:08 PM

Thanks.

I suck at the search function. I always get 1500 posts

Posted by: 76-914 Dec 20 2022, 10:44 PM

I'd recommend that you pull the glass from the door to access. Once it's pulled drill through the existing nuts with a small 3/16" bit IIRC. Then from the outside use a 6mm bit to enlarge the hole to 6mm. This way you won't end up with a large oval hole because you weren't dead center. The mirror base would hide an enlarged hole but you'll always know it is there.