Seems my passenger door isn’t latching properly all of a sudden. I really have to slam it for it to latch. The latch works fine if I flip it by hand. It’s seems like I need to move them closer together. The screws loosened right up but there didn’t seem to be any adjustment. Any advice is appreciated.
Try lubricating the latch mechanism first.
I think I got it. I took the jam piece off and cleaned it up then used more force then I wanted to to push it out while tightening it down.
Take a look at your suspension console too.... just in case.
^^^This.
The underlaying issue with 914 door problem and the first thing to break will be the door handle. Be careful. I can repair the flapper if it breaks.
And how does the door fit with rear fender edge...Door should be out just a little protecting fender edge from stones etc.
You should also remove the latch in the door and thoroughly clean and relube it. It's the major cause of broken door handles.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)