I have a stock 2.0 air cleaner. and it rattles around...... seems that I may be missing a part that "secures" the bracket to the intake runners on the driver side. (I have always found a way to wedge something on the bracket to try to keep it secure...... never works well)
Here's a couple of pics....... am i missing a key part? If so, does anyone have this part(s) for sale?
The smaller part of the bracket seems to be designed to slip between the intake runners and slide up to a relatively secure fit...... but i think that I am missing a part that actually secures the bracket before the air cleaner clips on
Cheers!
Used pair of intake runner "boots" that seal the runners to the plenum is the ticket. Slit down one side and place over the runner where the bracket is positioned under the air box, and then clamp the bracket onto them.
Like so:
Robert, I should have some used boots if you need some. Question is, where are they
I have a nice pair you can have. Call me
Andy to the rescue!
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)