I'm in the process of collecting parts for my 5 lug conversion and wanted to ask if a 71.6mm Bore. 52mm Offset 5 x 130mm Bolt Pattern 17" x 7" wheel would fit. I believe they were on the 968's, maybe Boxters. TIA, Kent
I have some printed pics of mine with what I think are Boxster wheels installed before I bought it. By the time I got it, Fuchs were installed. The pics were from a for sale ad that is gone now. It is a narrow body.
Should fit Kent. Mine are 17x7, 55 offset (I think they're same wheels you have on your orange car). You will need some spacers and longer studs. I have 15mm on mine. You can use the orange car wheels as test mules.
I should mention that the original set that came on a Boxster would be 7x17 front, 8.5x17 rear. Mine are all "fronts" so make sure you verify that . They're snug but they fit.
What kind of fool would want to do that??
All studs are 944 rear. I'll have to look at what spacers I ended up with. 15mm and 21mm I think. 225/45-17
Yeah those are exactly the wheels I have Chris. They look cool in red! 225s must BARELY fit in the rear. I'm @ 215/45/17 and there's very little space.
Just be careful with the rear fender clearance; static they might be fine, but once you are driving and in a sweeper at speed, you might experience some rub. Of course check the fronts for full turning clearance and make sure if the front suspension is compressed in a turn at speed you don''t catch a lip.
Great info from the 2 Chris' and Cairo.Thx for the tire sizes as that would have come up eventually . Thx
The Indy500 are a tad narrow at the tread which is good as the fronts are tight.
The rears are fine as I got a bit carried away with the roller.
235/70-15 anyone?
Spacers:
21mm front (944 early rear)
21+5mm rear
Factory alignment. I figured the short sidewall preferred minimal camber.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)