Hi Folks
I did a search and could not come up with the answer.
This is the clip (kind of a spring/tension clip) that holds the brake hose to the tab on the rear trailing arm.
Mine broke and I definitely need to replace.
Could be as common as dirt but I need to know which one will fit.
Lots of similar looking clips are sold by Amazon.
Thanks In Advance!
Curt
I would be PMB has those....
Probably available through a Porsche dealer, possibly still used on current vehicles. Check the parts book.
go to AA website click on parts,914, hard parts, brakes/wheels scroll down to brake lines and it's #9 (brake hose bracket)
I would call and talk to Holly at PMB; worth a try.
Just received mine from PMB. Ordered hoses over the phone and asked if they had the clips and sure enough!
Thank you all so much for all the leads.
I take note that not everything is on PMB's website
or maybe even 914Rubber for that matter.
Thanks Guys!
Curt
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)