Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Engine grill fasteners source

Posted by: TonyA Feb 6 2023, 06:35 PM

I can’t find a source for the engine grill fasteners. Anyone have a source?
Thanks

Posted by: Aerostatwv Feb 6 2023, 07:46 PM

Check out "emblem nuts" on Amazon.

Posted by: Van B Feb 6 2023, 08:25 PM

Both the letter nuts and hold down nuts for the grill are available through porsche and the aftermarket.

99950722040
99959121101

Posted by: sarivers2001 Aug 25 2023, 01:11 PM

I just received by Porsche part 901 59 301 23 (aluminum grill letters) to be installed on my ‘74 914 2.0L. Somewhere in its past, they had Ben removed.

Does someone out there have detailed (idiot proofs - - that would certainly be helpfully for me!) instructions on proper installation? Perhaps proper mm measurements (a) from left engine grill edge to left edge of “P”, (b) right engine grill edge to right edge of “E”, © proper, consistent spacing among the letters.

Also, the letter studs are not threaded and the “nuts” that came with the letters seem to be plastic. Do you just force the stud through the plastic?

Thanks!

Posted by: sarivers2001 Aug 25 2023, 01:12 PM

QUOTE(sarivers2001 @ Aug 25 2023, 12:11 PM) *

I just received by Porsche part 901 59 301 23 (aluminum grill letters) to be installed on my ‘74 914 2.0L. Somewhere in its past, they had Ben removed.

Does someone out there have detailed (idiot proofs - - that would certainly be helpfully for me!) instructions on proper installation? Perhaps proper mm measurements (a) from left engine grill edge to left edge of “P”, (b) right engine grill edge to right edge of “E”, © proper, consistent spacing among the letters.

Also, the letter studs are not threaded and the “nuts” that came with the letters seem to be plastic. Do you just force the stud through the plastic?

Thanks!


Whoops, part 901 559 301 23 (sourced through Auto Atlanta).

Posted by: DC_neun_vierzehn Aug 25 2023, 01:25 PM

QUOTE(sarivers2001 @ Aug 25 2023, 01:11 PM) *


Does someone out there have detailed (idiot proofs - - that would certainly be helpfully for me!) instructions on proper installation? Perhaps proper mm measurements (a) from left engine grill edge to left edge of “P”, (b) right engine grill edge to right edge of “E”, © proper, consistent spacing among the letters.

Thanks!


See this old thread:

www.914world.com/bbs2/index.php?showtopic=57029

Posted by: DC_neun_vierzehn Aug 25 2023, 01:26 PM

Attached Image

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)