Been spending some more time in the shop. Got the trimming on these correct finally and will have sets of door pockets available in durable ABS. Not fiberglass, so no splinters!
More info to follow next week. Who's interested? Will finalized the details next week.
For now here are some pics of the drivers fitment. Note these are much better than the fiberglass ones we used to stock, in that the top band fits nicely. The old ones you could make fit, but it was difficult to attach.
Attached thumbnail(s)
Attached image(s)
That does look very nice. I would be in for a set.
Dave
Purdy I would be on the list.
I'm in for a set, Mark.
I'd likely be in for a set.
im in for a set
in for a set, maybe 2
I’m in!
I'm in.
We have fiberglass for the big six and the four, but the original six has warped cardboard door pockets. So I need a set.
I’m in.
There are different part numbers for 70, 71, and 72+; do we know what the differences are and on which these are based?
I'm in for a set.
no criticism happy you made them , but they should be perfectly straight on the bottom edge and maybe sell them covered in the factory match material
I’d take a set.
I'm in for a ser.
yep, in for a set as well!
Good suggestion from George, FYI there also is a UK company that i got my shifter boot from, they do leather covers for these, and they offer covers for the back pad and a-pillars that can be made with any color stitching you want.
found them on EBay
+1
How about individual as the Passenger (late) lower is already plastic?
Please put me down for one set. Thx
I'm in for one set, maybe 2.
Do you have a ballpark cost - maybe I missed it? I'm probably in for a set.
In for a set
I should be good for a pair depending on finished product.
I'll take a set as well. Thanks!
I'm in for a set as well!
I'd like a set as well.
Please put me down as interested in a set.
A few more details / clarification
The bottom is actually straight, it kind of has to be to line up with the screw holes.
We pull these in sets so that is best pricing, but sure for those that want just one we can st that up after the GB.
As for “finishing “ we will offer a few options.
1- plastic only - with or without vinyl needed
2- with vinyl on them in black. These require some effort to glue properly and stretch over, so there is an added cost. We are working out costs now.
Thanks all,
Mark
I am in for a set. Any pictures of the passenger's side? Or of the two different sides together as a set?
I could use one set!
I'm in for a set
I would be in for a set
Interested
For sure think the vinyl wrap is the way to go.
Got snowed in , and it's slowing things down. Trying to make it to the office today. Will update.
So I need a set.
Rick O
I'll take a set, plastic only.
I hear you on the snowstorm. I got stuck overnight at PDX on Wed due to this freak storm. 5 hours to drive my 4WD 19 miles in the morning.
Dave
Yep slowing everything up. I’m supposed to go to Newark in the morning, we will see how that goes.
I’m in for 2 sets, plastic only. Thanks!
Put me on the list for a pair
I'll take a set.
I am in for a set.
Just a heads up, did 7 sets of these, got another 20 sets to go.
Pics next Monday. Pricking later this week.
Mark
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)