Needed for an upcoming project:
The correct Crower (only) valve springs
cam has .500/.507 lift, so no coil bind at this level of lift
to control valve float up to 6k RPM without excessive spring pressure
valves 48/38mm
Cannot figure out from Crower's website which ones to get & would like information or input from an independent source on Crower springs.
Thx
Call them. They used to be very good at helping. Crower (619) 661-6477
Thx for the reply/suggestion.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)