76 2.0 Djet
What is the proper routing for the drivers side fuel supply line to the injector rail?
Just going in to replace all engine bay lines and the driver side is laying on top of the motor, and does not seem right.
What do others have?
Rich
Mine lays on the engine as well.
Yep, but not right on it... Mine goes up over the oil fill etc.
Same, just seems kind of sloppy, but okay Dokey
OG there was a plastic like sleeve over the rubber line presumably to protect against heat or chaffing.
74 L jet. similar i'm guessing
as @http://www.914world.com/bbs2/index.php?showuser=453 says - fuel line runs inside plastic sleeve which clips to side of front inlet runner. clips are spot welded to runner.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)