Posted by: MedFly914 May 15 2023, 03:30 PM
Im getting ready to back date my bumpers and I just realized Im missing a part. Does anyone have the bracket for the center of the rear bumper top that prevents sagging above the license plate? I don't know the technical term for the part.
Any help is appreciated.
Posted by: mepstein May 15 2023, 04:02 PM
It’s pretty easy to make one.
Posted by: Type 47 May 15 2023, 06:47 PM
does this part have to be welded in place?
Posted by: mepstein May 15 2023, 07:13 PM
QUOTE(Type 47 @ May 15 2023, 08:47 PM)
does this part have to be welded in place?
Yes
Posted by: jim_hoyland May 15 2023, 07:53 PM
IIRC they’re a description fabricating that part in a thread. Seems like it may have been attached with a nut inside the trunk ?
Posted by: MedFly914 May 16 2023, 10:46 AM
Just found out its a bracket that is attached to the body. I will have to make one.
Posted by: Chris H. May 16 2023, 11:11 AM
Make sure it's extra sharp like the stock one... It will chew the skin off your shins like a can opener if you brush past it with the rear bumper off. I'm the only one that's happened to, right ?
Posted by: mepstein May 16 2023, 11:25 AM
QUOTE(Chris H. @ May 16 2023, 01:11 PM)
Make sure it's extra sharp like the stock one...
It will chew the skin off your shins like a can opener if you brush past it with the rear bumper off. I'm the only one that's happened to, right
?
Lol. I wish I could say it’s never got me.
Posted by: JeffBowlsby May 16 2023, 12:18 PM
Surely the bracket could be sourced from a donor tub.
Posted by: bdstone914 May 16 2023, 07:05 PM
QUOTE(MedFly914 @ May 15 2023, 02:30 PM)
Im getting ready to back date my bumpers and I just realized Im missing a part. Does anyone have the bracket for the center of the rear bumper top that prevents sagging above the license plate? I don't know the technical term for the part.
Any help is appreciated.
Early cars had a removable brace on the front cowl. I have cut off the end and used it for the rear center bumper pad support. I have one if you need it. It is wider and thicker than the original part.
Bruce
Posted by: Puebloswatcop May 16 2023, 07:28 PM
QUOTE(MedFly914 @ May 15 2023, 02:30 PM)
Im getting ready to back date my bumpers and I just realized Im missing a part. Does anyone have the bracket for the center of the rear bumper top that prevents sagging above the license plate? I don't know the technical term for the part.
Any help is appreciated.
I have a rear wall that was removed from my fire car, let me see if the shin skinning bracket is there. If it is, its yours for the cost to ship.
Posted by: Puebloswatcop May 16 2023, 07:53 PM
QUOTE(MedFly914 @ May 15 2023, 02:30 PM)
Im getting ready to back date my bumpers and I just realized Im missing a part. Does anyone have the bracket for the center of the rear bumper top that prevents sagging above the license plate? I don't know the technical term for the part.
Any help is appreciated.
So I believe this is the sinister part you are looking for. If you still need it, PM me and I will remove it, straighten it, blast it and prime it, then send it to you all for the cost of mailing it.....
Posted by: MedFly914 May 19 2023, 11:27 AM
@pueblosatcop: I just PM'd you. Thanks,
Posted by: friethmiller May 19 2023, 12:41 PM
I've got 2 pairs of jeans each with a hole from that damn thing!! Pretty darn important when you go to finally install the bumper though
Posted by: Puebloswatcop May 21 2023, 08:30 AM
Sending the shin skinner tomorrow
Posted by: Puebloswatcop May 21 2023, 08:31 AM
QUOTE(friethmiller @ May 19 2023, 11:41 AM)
I've got 2 pairs of jeans each with a hole from that damn thing!! Pretty darn important when you go to finally install the bumper though
Yep. I have several pair myself including one brand new pair. A real pisser.....