Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ Ass Whipin given

Posted by: Joe Ricard Aug 14 2005, 07:54 PM

Hassan gave the crownd a real treat in my car AGAIN. not TTOD but very close. Old Kumhos just don't grip like thery used to. I have counted 187 runs on them. We are breaking out the hoosiers next weekend. Ya'll stand by Them hondas on new tiars ain't got a chance in hell against my car on new A compound Hoosiers on 15 x 8 rims.

Anyway the flipped ZD gear in 3rd spot is a real rocket ride. Best I can tell 5800 RPM rev limit is around 65 or so. now 4th is a touch too tall. Aaron said something about an S gear. Hmm gotta do more research must find S gear.

Posted by: Aaron Cox Aug 14 2005, 08:06 PM

QUOTE (Joe Ricard @ Aug 14 2005, 06:54 PM)
Hassan gave the crownd a real treat in my car AGAIN. not TTOD but very close. Old Kumhos just don't grip like thery used to. I have counted 187 runs on them. We are breaking out the hoosiers next weekend. Ya'll stand by Them hondas on new tiars ain't got a chance in hell against my car on new A compound Hoosiers on 15 x 8 rims.

Anyway the flipped ZD gear in 3rd spot is a real rocket ride. Best I can tell 5800 RPM rev limit is around 65 or so. now 4th is a touch too tall. Aaron said something about an S gear. Hmm gotta do more research must find S gear.

sweet....

im doing the ZD flip and the S gear for 4th.....

ill have a Q gear which is even shorter shortly....

A F ZD(fl) Q/S ZD would make an awesome 'pull like a train' box

let me know what you wanna do smile.gif

AA

Posted by: drew365 Aug 14 2005, 08:13 PM

My gear box is A Ga Ka Q V. Works really good for the tight tracks. Not so good at California Speedway.

Posted by: Aaron Cox Aug 14 2005, 08:34 PM

whats the ratio of a Ka?


A F ZD(fl) S ZD or A F ZD(fl) Q ZD would be a great 1,2,3,4 close ratio box and a nice stock overdrive for 5th.......

a Q gear for 4th would make it a real nice and short gap between your short third to your fourth.....
an S gear is just a 'Tad' Taller than a Q, a little better at bridging the gap between your new 3rd ratio and your stock 5th ratio....

do you ever get up to 4th at your AX joe? pick your poison.... Q or S biggrin.gif

Posted by: drew365 Aug 14 2005, 08:39 PM

I believe Ka is what a flipped ZD works out to.

Posted by: Eric_Shea Aug 14 2005, 08:47 PM

Shit... I was looking for pics of stromberg.gif

Posted by: Aaron Cox Aug 14 2005, 08:48 PM

QUOTE (drew365 @ Aug 14 2005, 07:39 PM)
I believe Ka is what a flipped ZD works out to.

ahh - fits right between a K and an L... 1.409.... thus the KA...

any problems running asymettrical gear ratios????

thanks...
Aaron

Posted by: Joe Ricard Aug 15 2005, 05:13 AM

Yes we are in 4th on 2 sections of the course. Very fast events on the old air strips which are basically down and back witha bunch of crap in the middle.

Saturday is a huge parking lot so pretty much 3rd all over. I was looking through my pile of gears and have one with an S on it. but haven't figure out which one matches with it. Got a line on some gear stacks from a junk dealer. maybe I will get lucky and find a 1st gear slider and dog teeth.

Posted by: Aaron Cox Aug 15 2005, 01:44 PM

QUOTE (Joe Ricard @ Aug 15 2005, 04:13 AM)
Yes we are in 4th on 2 sections of the course. Very fast events on the old air strips which are basically down and back witha bunch of crap in the middle.

Saturday is a huge parking lot so pretty much 3rd all over. I was looking through my pile of gears and have one with an S on it. but haven't figure out which one matches with it. Got a line on some gear stacks from a junk dealer. maybe I will get lucky and find a 1st gear slider and dog teeth.

S is 25:26.. Ie, one geasr has 25 teeth, other has 26 smile.gif


Posted by: Joe Ricard Aug 15 2005, 02:35 PM

Obi one Hassenobi driving the Red Neck Racer. with a passenger of course. We ought to start charging for ride alongs.... Might pay for the gas.
Ain't it purdy


Attached image(s)
Attached Image

Posted by: Joe Ricard Aug 15 2005, 02:40 PM

And yes this is flat footing 4th about 4500 RPM. Scaring me good he was.


Attached image(s)
Attached Image

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)