recommended products to protect cables from headers
TIA
DEI makes great heat protection products in all shapes and sizes.
I use their hook/loop heat screen for protecting cables and electrical wiring around the Tangerine exhaust on the race car. Wrap it around the cables/wires and use a tad bit of safety wire to secure it in place. - GA
https://www.designengineering.com/heat-shroud-0-75-x-36/
https://www.designengineering.com/products/line-sleeving-tubing/
I've just put the engine back in the car, trying a length of this stuff:
specifically the 1" material which allows the speedo cable termination to slide through easily.
- Tony
Pegasus Auto racing supplies in Wisconsin,
I use the Goodridge brand fire-sleeve with good results.
Avail in several diameters.
I bought mine from Tangerine Racing.
Chris sells good stuff.
Another tangerine shield user here
Your header will come with a reflective sleeve for the cables.
As much as I liked the Firesleeve's insulating properties, I didn't particularly like sliding it on and off the cables. Maybe better on a street car than on a race car.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)