Printable Version of Topic

Posted by: DocinGA Jul 28 2023, 07:43 PM

Looking for a raised center armrest with cupholders maybe!! I have seen a center cushion replacement that fits in the center cushion tray that provides storage and maybe cup holders. Anybody know the source of such an animal!!!

Posted by: mepstein Jul 28 2023, 07:45 PM

I believe you want an amco center console. No longer made but someone might still have one.




Attached thumbnail(s)

Posted by: Steve Jul 28 2023, 08:32 PM

I bought this one and modified the hinge to open the same as a 914 lid.
https://www.jbugs.com/product/BD-Drinkster.html

Posted by: Van B Jul 28 2023, 09:48 PM

I would like to see how that look’s installed if you have pics?

Posted by: Steve Jul 28 2023, 10:29 PM

This is in my v8 car. I also put the same one in my blue six.

Posted by: 930cabman Jul 29 2023, 05:28 AM

Great looking ride

she must fly like the wind

Posted by: Steve Jul 29 2023, 07:11 AM

She’s a beast! Too bad Kent didn’t market the flairs.
Photo courtesy of Siverson

Posted by: Van B Jul 29 2023, 07:24 AM

Thanks. It looks 100% correct in your car since the whole interior is of the same standard.

Posted by: Steve Jul 29 2023, 08:27 AM

Here it is in my six.



Attached thumbnail(s)

Posted by: DennisV Jul 29 2023, 09:48 AM

Did it require any modification to fit, other than the hinge you mention?

Posted by: Steve Jul 29 2023, 09:57 AM

Nope, it fit very well. It was easy to remove the hinge and use a dremel cut off wheel to shorten the hinge to work in the back. I then used the stock one to drill the two front holes through the cup holder to mount it. I never did the rear holes. Works great for standard water bottle and cans. Does not work with big gulp cups or large drinks.

Posted by: DennisV Jul 29 2023, 10:05 AM

Nicely done Steve. Thanks for sharing.

Posted by: Geezer914 Jul 29 2023, 10:20 AM

Made my own.

Posted by: DC_neun_vierzehn Jul 29 2023, 10:57 AM

Did you order the Madrid Black or Midnight Black?

Posted by: Steve Jul 29 2023, 11:11 AM

Madrid black

Posted by: NARP74 Aug 30 2023, 08:34 AM

@http://www.914world.com/bbs2/index.php?showuser=10179 I see you have a Rennshift with a center console. I am trying to do the same thing. What did you do for the pad that the shifter goes through. The stock one is the wrong size so the shift hole needs to be bigger as you know. Your solution looks good.

Posted by: Geezer914 Sep 4 2023, 12:25 PM

You have to enlarge the hole to fit the Ren shifter.

Posted by: NARP74 Sep 4 2023, 04:12 PM

Duh, I was hoping for a little more...