Printable Version of Topic

Click here to view this topic in its original format

914World.com _ 914World Garage _ 914-6

Posted by: Billdrillen Sep 12 2023, 09:14 AM

Hi,
I am putting my 914-6 back together and not sure of the condition of this control unit. I am looking for any suggestions of where I can send this to have a checked out and potentially rebuild if necessary. Thanks! birthday3.gif Attached Image

Posted by: 930cabman Sep 12 2023, 10:29 AM

welcome.png

I am unaware of any source who can test these? was the control unit working previously?


Posted by: Bullethead Sep 12 2023, 10:40 AM

Send it to Pelican, they'll rebuild it for $339 bucks.

https://www.pelicanparts.com/More_Info/ATCDIREPAIR.htm?pn=AT-CDIREPAIR&gclid=Cj0KCQjwmICoBhDxARIsABXkXlL0BColsCLN8Dz9DgZQg-35xTQrDd_AbckaqS0Yimtr0516IdKg410aAiJkEALw_wcB&ByPassCat=Y

Posted by: 914043 Sep 12 2023, 10:45 AM

go to partsklassik porsche to get their CDI box an updated version that eliminates all the problems with the original.truly a great improvment.

Posted by: gms Sep 12 2023, 10:52 AM

pm sent

Posted by: ClayPerrine Sep 12 2023, 11:45 AM

@http://www.914world.com/bbs2/index.php?showuser=21587

Zims can test and rebuild them for you.


Posted by: johnhora Sep 12 2023, 12:19 PM

Check with Lonnie....

https://permatune.com/

Posted by: dr914@autoatlanta.com Sep 12 2023, 12:39 PM

Here is the best guy:
lauren
systems consulting
3520 maple ave

manhattan beach, ca 90266

Posted by: porschetub Sep 12 2023, 01:30 PM

QUOTE(Billdrillen @ Sep 13 2023, 03:14 AM) *

Hi,
I am putting my 914-6 back together and not sure of the condition of this control unit. I am looking for any suggestions of where I can send this to have a checked out and potentially rebuild if necessary. Thanks! birthday3.gif Attached Image

Bob @ AshlockTech ,great guy and excellent service ,cheers.

Posted by: rgalla9146 Sep 13 2023, 02:40 AM

QUOTE(porschetub @ Sep 12 2023, 03:30 PM) *

QUOTE(Billdrillen @ Sep 13 2023, 03:14 AM) *

Hi,
I am putting my 914-6 back together and not sure of the condition of this control unit. I am looking for any suggestions of where I can send this to have a checked out and potentially rebuild if necessary. Thanks! birthday3.gif Attached Image

Bob @ AshlockTech ,great guy and excellent service ,cheers.


I've had good luck with Ashlock.
Beautifully restored and working well.
Recommended

Posted by: gereed75 Sep 13 2023, 08:12 AM

i have the partsklassic. up dated circuitry all good after 6 years

Posted by: DennisV Sep 13 2023, 08:30 AM

QUOTE(porschetub @ Sep 12 2023, 12:30 PM) *

Bob @ AshlockTech ,great guy and excellent service ,cheers.

I also had a very good experience with https://ashlocktech.com/bosch-cdi.

Posted by: porschetub Sep 13 2023, 10:51 PM

QUOTE(DennisV @ Sep 14 2023, 02:30 AM) *

QUOTE(porschetub @ Sep 12 2023, 12:30 PM) *

Bob @ AshlockTech ,great guy and excellent service ,cheers.

I also had a very good experience with https://ashlocktech.com/bosch-cdi.

agree.gif my experience has been great over many years after going the "6 cyl " conversion.
Got a nice loom off Perry,and Bob helped me opitmize my ignition after buying his tach adapt ,it has been a really good reliable system since then and he give his extensive knowledge freely ,cheers.


Posted by: Michael N Sep 14 2023, 07:09 AM

QUOTE(DennisV @ Sep 13 2023, 06:30 AM) *

QUOTE(porschetub @ Sep 12 2023, 12:30 PM) *

Bob @ AshlockTech ,great guy and excellent service ,cheers.

I also had a very good experience with https://ashlocktech.com/bosch-cdi.



Absolutely agree as well. Top notch service.

Posted by: nditiz1 Sep 14 2023, 07:15 AM

Ashlock is the best and a nice guy. He even offers an upgraded version and takes yours as a core I believe. Warrantied for as long as he is alive biggrin.gif

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)