I am looking at a '74 914 2.0 and was sent this picture.
I saw this expanded metal on a Bring-A-Trailer 914 recently. Is this some kind of bad repair from rusted frunk floor or ?/
All guidance is welcome Thanks
Need to investigate the scoop and the reason for the hole in the floor further.
I would also be interested in that sway bar set up also. Looks like a hack job with an aftermarket bar, or from an entirely different car. Definitely not stock.
Looks exactly like mine with the dealer AC "option" installed. And by option i mean hacked in option
That's for the dealer/owner installed aftermarket AC condenser. They all look like hack jobs. If the car still has AC then I consider that a plus. The evaporator assembly under the dash hasn't changed much but modern condensers, compressors and hoses are much improved.
That sway bar though... haven't seen one like that ever in 30 years.
Definitely the A/C condenser input/output on the frunk floor. The hack is that sway bar!
Thanks everyone. Yes, the car has AC and It appears like all the ACs that I had seen in 914s Didn't realize they were dealer add ons but makes sense.
Appreciate the help.
That interior looks real nice. The AC vents blend in well.
Yes ac hack for sure now the 24000 dollar question does the ac work ? And do you have a couple cans of r12
AC cut-out for sure. And not a stock 914 sway bar.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)