Ok, World......
I have the sheets with the torque requirements on every bolt on the engine and transmission - and neither includes the torque of the 4 - 12 pt. bolts that attach the half-shafts to the tranny hubs.
Unless I'm missing it.
Searched web and still cannot find it.
Appreciate help knowing what that torque is before I move on from the hub bolts.
TIA,
GN
I went with a very good crank on the old ratchet. And I keep an eye on them.
Here you go.
Yes, 31 ft lbs and with the Schnorr washers. One time use. Best, Mark
Gentlemen -
Thank you. Missing on my list I think.
Schnorr washers are what hold 2 - bolts? So I need new ones?
Ok.
Thank!
GN
All properly torqued.
Thanks again friends.
GN
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)